Special Offers

Detects motion by measuring abrupt temperature changes relative to its the surroundings, such as when a person cuts through its detection region. Features :Output goes high upon detectionUser installable LDR to inhibit dtection function during daytime or bright light conditions...

SIM800L GPRS GSM Module with Microsim Card Breakout board with UART and voice channel I/O. Popular with M2M, security, and home automation applications where remote control and monitoring is desired while you are on the go. gizDuino/Arduino compatible, supported by open source libraries.Downloads : ..

The e-Gizmo temperature control unit display is a simple temperature control and readout unit. It uses an LM34 temperature sensor and display the temperature in degrees Centigrade units.Features :Interface with gizDuino MCU.Reading is calibrated directly to celciusLinear 10.0 mV/de..

e-Gizmo Serial LCD II with Keypad Function is a general purpose display and inputs. It is designed interface to Serial LCD II rev2 with built-in microcontroller applications. A friendly-user display messages and data through its compact LCD 4x20 character display or 2x16 LCD character display to cho..

e-Gizmo Serial LCD II with Keypad Function is a general purpose display and inputs. It is designed interface to Serial LCD II rev2 with built-in microcontroller applications. A friendly-user display messages and data through its compact LCD 4x20 character display or 2x16 LCD character display to cho..

e-Gizmo Serial LCD II with Keypad Function is a general purpose display and inputs. It is designed interface to Serial LCD II rev2 with built-in microcontroller applications. A friendly-user display messages and data through its compact LCD 4x20 character display or 2x16 LCD character display to cho..

e-Gizmo Serial LCD II with Keypad Function is a general purpose display and inputs. It is designed interface to Serial LCD II rev2 with built-in microcontroller applications. A friendly-user display messages and data through its compact LCD 4x20 character display or 2x16 LCD character display to cho..

e-Gizmo Serial LCD II with Keypad Function is a general purpose display and inputs. It is designed interface to Serial LCD II rev2 with built-in microcontroller applications. A friendly-user display messages and data through its compact LCD 4x20 character display or 2x16 LCD character display to cho..

e-Gizmo Serial LCD II with Keypad Function is a general purpose display and inputs. It is designed interface to Serial LCD II rev2 with built-in microcontroller applications. A friendly-user display messages and data through its compact LCD 4x20 character display or 2x16 LCD character display to cho..

The new Serial LCD II display kit is an interface board that allows you to use LCD displays in your project without the coding pains associated with it. Displaying a message from your host controller becomes just a simple matter of sending the message to display through your host MCU UART. Compatibl..

Note: This item is sold at a discount because of blemished pins (due to long storage).Maximum Recurrent Reak Reverse Voltage: 600VMaximum RMS Bridge Input Voltage: 420VrmsMaximum Average Rectified Current: 4ASurge Current (1/2 cycle): 200AMaximum Forward Voltage per element: 1.1VIt Rating for fusing..

Dual Drive Shaft Gear motor. Nidec Servo. Made in JapanNominal Voltage: 24VDCNo Load Current: 250mA TypicalNo Load Speed: 630 rpm Gear output drive shaftGear Ratio: 5.8:1Power: 19W approx.Output Stall Torque: 1.7 Nm approx.Drive Shaft Geared Output: d6x73mmDrive Shaft Motor Output: d5x31mmMotor+ Bac..