All Products
Hook clips are handy for making temporary connections without soldering, streamlining testing and development processes. Owing to their shape, these can easily reach connections even in crowded areas of the installation.Grabber/Hook Test ClipColor: BlueSpring-loaded.Length: 58mm Approximately..
₱12.00
Hook clips are handy for making temporary connections without soldering, streamlining testing and development processes. Owing to their shape, these can easily reach connections even in crowded areas of the installation.Grabber/Hook Test ClipColor: BlackSpring-loaded.Length: 58mm Approximately..
₱14.00
Model: ST 1102VS series or equivalentConfiguration: SPST MomentaryType: 6x6mm SMD Right AngleKnob: 2mm approx.Mechanical Durability: >100,000 operations 15-20cpsOperating Force: 160gFRating: 50mA @ 12VDCContact Resistance: 100mR maximum..
₱4.00
Pre-order
MH-ET LIVE is an embedded 1D/2D BarCode reader with UART port for easy integration with your microcontroller based or Arduino Project.Port: UART (TTL) Interface, HID (Micro USB)Baud Rate: 9600 (default)1D Format: - UPC/BAN, EAN, ISSN, UCC, Code128, GS1-128, ISBT 128, Code 39, etc.2D Format: - QR Co..
₱1,250.00
Pre-order
Model No: KEM10106AH or equivalentSpecifications:Peak Emiision Wavelegth: 640nmForward Voltage: 1.8V @ 10mAPeak Forward Current : 200mA 1/10 duty @ 10KHzDisplay Size: 25.4mm (1.0 inch)No of pins: 10Polarity: Common Cathode..
₱36.00
Model No: KEM10106BH or equivalentSpecifications:Peak Emiision Wavelegth: 640nmForward Voltage: 1.8V @ 10mAPeak Forward Current : 200mA 1/10 duty @ 10KHzDisplay Size: 25.4mm (1.0 inch)No of pins: 10Polarity: Common Anode..
₱36.00
Model No: 5161AS or equivalentSpecifications:Peak Emiision Wavelegth: 640nmForward Voltage: 1.8V @ 10mAPeak Forward Current : 200mA 1/10 duty @ 10KHzDisplay Size: 14.2mm (0.56 inch)No of pins: 10Polarity: Common Cathode..
₱19.00
Model No: 5161BS or equivalentSpecifications:Peak Emiision Wavelegth: 640nmForward Voltage: 1.8V @ 10mAPeak Forward Current : 200mA 1/10 duty @ 10KHzDisplay Size: 14.2mm (0.56 inch)No of pins: 10Polarity: Common Anode..
₱19.00
3 axis accelerometer +3 axis gyroscopewith on-board Low Dropout Voltage Regulator.Sensor Chip: MPU-6500Power Supply: 3-5V DCCommunication Interface: I2C or SPIGyroscope Range: +/- 250, 500, 1000, 2000 degrees per secAcceleration Range: +/-2,4,8,16gADC and DAC Conversion: 16 bitsNumber of Pins: 10..
₱160.00
Brand: Kamoer
Liquid dosing peristaltic pump. The flow rate can be varied by adjusting the supply voltage.Manufacturer: kamoerModel: NKP-DCL-S10GOperating voltage:12VDC NominalOperating Current: 200mA @ 12VDC TypicalFlow Rate: 80mL/min @ 12VTube Type: Silicone 3x5mm..
₱390.00
JDY-31C Bluetooth Module is a Bluetooth 3.0 compliant transparent mode serial module (SPP Protocol) that has the same functionality and can be used as a cheaper replacement for the popular HC-05 or HC-06 module.The interface board has on-board LDO regulator to allow the module work with 5V power inp..
₱145.00
AS608 Optical Fingerprint Sensor Adafruit Library compatibleNote: This module will work only with 3.3V Supply and Logic Levels. It is level compatible with Rapberry Pi and most ARM based controllers. If you want to use this with 5V host controllers, level converter must be used on the TX and RX pin...
₱555.00