All Products
Brand: e-gizmo
PVG612 SSR Kit is a ""NORMALLY OPEN"" Solid-state Relay that can replace electromechanical relays in many applications. The compact PVG612 is particularly suited for iolated switching of high currents from 12 to 48 volts AC or DC power sources. The applications of this type of ssr are mainly devices..
₱135.00
-17%
For Restocking
This liquid level sensor uses advanced signal processing to detect presence of liquid in containers without having to drill holes. This sensor is installed OUTSIDE of the container. The liquid does not have to be in physical contact with the sensor. Works only with non metallic containers. Works saf..
₱382.50
The rain sensor module is an easy tool for rain detection. It can be used as a switch when raindrop falls through the raining board and also for measuring rainfall intensity. The module features, a rain board and the control board that is separate for more co..
₱59.00
-48%
Class II Bluetooth module with SPP profile (Wireless serial cable replacement). 3.3V UART output. User configurable parameters using simple set of AT commands. Module available in Master/slave EGBT-045MS and lower cost slave only EGBT-046S device. * Class II Bluetooth device typica..
₱250.00 ₱485.00
Brand: e-Gizmo
GSMIO is highly configurable application specific SMS based board that you can use to add SMS remote control functionality to your projects, fast and easy. With GSMIO, you have no longer need to get through all those long and difficult programs normally associated with developing SMS devices. Thus w..
₱1,970.00
-44%
For Restocking
E01-ML01DP5 2.4G 22dBm 100mW nRF24L01P+PA+LNA Wireless Transmission Module.Specifications :Module size: 18 * 33 mm, excluding SMA antenna pedestalInterface: 2.54 * 2 * 4, 2.54mm pitch allows it use with universal boards.Supply voltage: 2.0-3.6V, Note: Do not exceed 3.6V. Permanent damage to th..
₱350.00 ₱630.00
An Arduino / gizDuino Compatible mini Mp3 Player that can directly drive a loudspeaker. This module can also be used as standalone Mp3 player with the addition of a speaker and push button switches.Specifications :Power Input
3.2~5VDCSD Card supported format type
FAT16 & FAT32 (upt..
₱99.00
Brand: e-gizmo
e-Gizmo Bio-Amp Sensor Circuit is an instrumentation amplifier designed to pick-up minute electrical voltage by living biological organ like the human body. Its main feature is the use of Signal Opto-Isolation and high CMRR instrumentation amplifier output.Downloads :Technical Reference
Dow..
₱1,385.00
-28%
Brand: e-gizmo
Nicknamed Beefy, this H-Bridge Motor Driver is the latest variants in our high current DC motor driver series. Ideal for use in intermittent low duty high current applications, like mobile robots.Specifications :Motor Supply Voltage
7-35VDCLoad Current
> 20A surge, 6A Continu..
₱550.00 ₱765.00
General Purpose Break-out Adapter Board for ESP07 , ESP08, & ESP12 Wifi Modules.This board provides a convenient way to connect your ESP module to a breadboard or other circuit modules.-With pre-soldered resistors.-Solder pads for the optional voltage regulator.Weight: 4gNote: PCB Board and pin ..
₱15.00
-23%
3A Push Button Adjustable Stepdown Power Supply w/ LCD Display and Acrylic case.LCD Display Parameter: Output Voltage, Output CurrentInput Voltage: 5-20VDCOutput Voltage Range: 0-16.5VAdjustment Steps: 0.04VOutput Current: 2A continous, 3A peakNote: 1. Output voltage cannot go higher than the input ..
₱299.00 ₱390.00