-50x50w.jpg "gizDuino + with ATmega324")
Converters and Power Supplies
This product is a high-efficiency DC-DC Step Down Converter. It can be used as a power supply or charger module.Input Voltage Range: 4-38VDCOutput Voltage Adjustment Range: 1.25-36VDCOutput Current: 5A Max.Output Power: 75W MaxEfficiency: Up to 96%Protection: Thermal Shutdown & Output short circuit...
₱84.00
Pre-order
3S 20A Li-ion Battery Charger BMS Protection with Recovery FeatureSuitable for 3x 18650 batteriesCharging Voltage cutoff: 3.7V-4.3V per cellDischarging Voltage cutoff: 2.3-3.0VCurrent: 20A maximum..
₱65.00
With this product, You can easily build a DIY power bank from a single 3.7V Lithium Ion battery. - Integrated charging and dsicharge management.- High temperature shutdown protection.- Output short circuit and over voltage protection.Input Voltage: 3.7V-5.5VDCInput Low Voltage Cutoff: 2.9VCharging C..
₱25.00
This product will work even with 1 cell niMH battery. Output current capacity varies with the input voltage, with higher voltage resulting with higher efficiency and available current output.Operating Input Voltage: 0.9V-5VmaxConversion Efficiency: up to 96%Output Port: USB FemaleCaution: Module may..
₱46.00
Installing your expensive electronics outdoors or one that requires wires coming from the outside must be protected from harm due to power surges caused by natures playfulness (e.g., thunderstorms, solar flares).This kit inserts surge protective devices - MOVs, Gas discharge tubes, common-mode induc..
₱129.00
Specifications; (Please see Notes)Input Voltage: 4.5-40VDC Adjustable Output Voltage Range: 1.25-37VDCOutput Current: 3A Max Digital Display: 3-digit 7 segment LEDOutput ON/OFF push button switch.Important Notes:For proper operation:1. Input voltage must always be greater than the input voltage by ..
₱135.00
Specifications; (Please see Notes)Input Voltage: 3.5-12VDC Adjustable Output Voltage Range: 1.25-24VDCOutput Power: 2-3WDigital Display: 3-digit 7 segment LEDPower input ports: USB or uUSB or Solder PadsOutput ON/OFF push button switch.Important Note:Efficiency and power output capacity drop with i..
₱120.00
Pre-order
Important: This BMS is designed to work with 3.2V(Nominal) LiFepO4 batteries only. Maximum Discharge Current: 30A Continous, 56A momentaryCharging Current: 20A maxCharging Voltage: 14.8V NominalProtection:Output Overcurrent and Short Circuit protection: 56+/-10AOvercharge Detect: 3.75V +/- 0.05V per..
₱209.00
Input Voltage Range: DC 3V-35VAdjustable Output Voltage: 4V-40VDCLoad Capacity: 80W Max.Important Warning:Do not adjust the output voltage higher than 40VDC. It will kill the board. The manufacturer of this board did not provide protection to limit the output voltage to a safe value.Notes:- The outp..
₱159.00
This DC/DC Converter module provides bipolar output (positive, negative) from a unipolar DC source. Great for mixed analog/digital circuits where a bipolar DC supply may not be readily available. Input Voltage: 3.3V-13VDCOutput: +/- 15VDC FixedOutput Current: 600mA + rail, 120mA - railInput Standby..
₱196.00
Pre-order
Converts 5V USB power to 9 VDC on a d5.4 x d2.1mm barrel plugIt is a USB cable with a built-in boost converter.Maximum output current: 800mACable Lenght: 1M approxInput: USB Type A plugWeight: 26g..
₱79.00
5V 5A USB Charging Port DC-DC Converter Module LM2596sInput Port: Screw Terminal + DC JackOutput Port: Screw Terminal + USB Charging PortInput Voltage: 9V-36VDCOutput Voltage: 5.2VOutput Current : 6A 30W for Input Volatge: 9 - 24VDC 5A 25W for Input Voltage: 24-32VDC 3.5A 18W for Input Volatg..
₱159.00