All Products

Nader Industrial DIN Mounting Circuit BreakerRated Voltage: 240VAC, 60VDCRated Current:: 125ACapacity: 10kAMounting: DIN Rail ModularTerminals: Bolt OnEndurance: 20000 operationsSafety Approvals: TUV,CCCWeight: 166g approx.Note: This is a used surplus item in good working condition. There may be so..

Chemi-con MVK Series General Purpose Aluminum Electrolytic CapacitorManufacturer Part No: EMVK350ADA470MHA0GCapacitance:47uF +/-20%Working Voltage: 35VDCCategory Temperature Range: -40C to +105CDissipation Factor: 0.14 @120HzRipple Current: n/aImpedance: n/aDimensions: d8 x 10mmMarkings may vary fro..

CapXon (Taiwan) KF Series Low Impedance CapacitorCapacitance: 2200uF +/-20%Working Voltage: 25VDCMax. Impedance @100KHz: 0.035RDissipation Factor: 12%max at 120HzLoad Life: 2000-5000 Hours at 105CRipple Current: 2650mA @ 105CDimensions: d12 x h40 mmLead Spacing: 5mm..

Nippon Chemi-con Conductive Polymer Aluminum Solid Capacitors SMD.Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte.Manufacturer Part No: APXC6R3ARA181MF60GCapacitance: 180uF +/-20%Working Voltage: 6.3VDCCategory Temperature Range: -55C t..

- Industrial grade 2 Phase Stepper, 0.5-2.0A/Phase, 3A, Unipolar, 40K pps, Microstep-Unipolar constant current drive methodA. Driver MD2U-MD20 (Made in Korea)Power Input: 24-35VDCCurrent Output: 3A max.Run Current: 0.5 to 2A per phaseStop Current: 20% to 70% user presetableMicro Steps: 1,2,4,5,8,10,..

Industrial grade components are built tough and reliable. They are designed to work and survive harsh conditions normally found on the inside of the machines and some industrial settings.Made in KoreaType: Residual Current, Earth Leakage Circuit BreakerRated Voltage: 220VACRated Current:: 20ALeakage..

Panasonic 3V Lithium Battery with solder tabs for heavy-duty backup functions.Note: This is NOT a rechargeable batteryNominal Voltage:3VCapacity: 620mAhContinuous Standard Load: 0.2mADimensions: d24.5 x 5.0mmWeight: 6.2g approx.Operating Temperature: -30 to +85CTab Terminal: H Type..

True rated Li-ion Battery with built-in BMS protection board.MPN: F26402274Nominal Voltage: 3.6VCapacity: 2200mAh 8.1WhDimensions: 18650 sizeCells: Sanyo/Panasonic UR18650AATermination: 3-wire Molex 3.96mm pitch.Actual Measured Capacity (random sampling) @ 1.0A constant current discharge2.08, 2.12..

True rated Lipo Battery with built-in BMS protection board.UL Approved.Nominal Voltage: 7.4VCapacity: 1800mAh 13.32WhCharging Voltage Limit: 8.4VYear Manufactured: 2014-2015Dimensions:56.5Wx60Lx13T mm approx.Actual Measured Capacity - 1650mAH to 1750mAHInstrument Used: Itech IT8512C Electronic LoadC..

VMECA Midi Keyboard Pump is stackable vacuum generator. Each pump creates vacuum as an individual pump. The advantages of this unit is that it can be operated using just two control valve while retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation..

MCU: R7FA4M1 Arm Cortex M4 Single CoreMemory: 256K Flash, 32KB SRAMEEPROM: 8Kx8Operating Voltage: 5VPower Supply Input Voltage: 6-24VDCClockFrequency: 48MHzUSB Port: Type CADC ports: 6 (14 bits Resolution)Digital I/O Ports: 14-PWM Capable Ports: 6-DAC Capable Ports: 1 (12 bits Resolution)-SPI Capabl..

MCU: R7FA4M1 Arm Cortex M4 Single CoreMemory: 256K Flash, 32KB SRAMEEPROM: 8Kx8Operating Voltage: 5VPower Supply Input Voltage: 6-24VDCClock Frequency: 48MHzUSB Port: Type CWifi/Bluetooth Module: ESP32-S3-MINILED Display Array: 12x8ADC ports: 6 (14 bits Resolution)Digital I/O Ports: 14-PWM Capable P..