New Arrivals Kits and Modules

TDS Sensor Water Conductivity & Quality Board Module

TDS Sensor Water Conductivity & Quality Board Module

Pre-order

Total Dissolved Solids TDS is an important parameter that determines water quality. It is a measure of the amount of dissolved substance in the water. This kit provides an indirect but fairly accurate way of measuring TDS - by measuring water conductivity. Operating Voltage: 3.3V to 5.5VDCOperating ..

₱299.00

Humidifier Atomizer Mist Maker Kit Module

DIY ultrasonic mist maker/ Humidifier kit.Kit contains:1x Driver Module1x AtomizerPower input: 5V DCPower Port: micro-USBAtomizer aperture: 5umUltrasonic Frequency: 100kHzPower: 2W..

₱98.00

AC 220V to DC 5V 700mA Converter Module Isolated

220VAC to DC5V Isolated power supply module with secondary overload and short circuit protection. This module provides a cost effective solution to applications that requires an onboard AC converter circuit.AC Input: 85V-265VACDC Output Voltage: 5VDC nominalMaximum Output Current: 700ma (3.5W)Peak ..

₱95.00

3S 6A Li-ion BMS Protection Board

3S (11.1V) Li-ion Battery BMS Protection BoardProtects your Li-ion Battery from Over charging and discharging, short-circuit, and over current. Designed for 3S battery pack in triangular arrangement.Overcharge Voltage: 4.25V-4.35VOverdischarge Voltage: 2.3-3.0VWorking Current: 6-8AOvercurrent: 9-10A..

₱98.00

4S Li-ion 40A BMS Board 80A Over Current

Nominal Voltage: 14.8VRds (on): 3mRContinous Current: 40AOver Current Protection: 80ATypical Performance (per cell)Overcharge Protection Voltage: 4.3VOver-Charge Recovery Voltage: 4.15VOver-Discharge Recovery Voltage: 3.2VOver Discharge Protection: 2.5VReminder:Always put a heavy capacitor (>100uF/2..

₱99.00

3S Li-ion 40A BMS Board with Charge Balancing Function

Nominal Voltage: 11.1VRds (on): 3mRContinous Current: 40AOver Current Protection: 80ATypical Performance (per cell)Overcharge Protection Voltage: 4.3VBalance Charging Start Voltage: 4.17-4.23VBalance Current: 100mABalance Charging Current: 1.72WOver-Charge Recovery Voltage: 4.15VOver Discharge Prote..

₱121.00

3S Li-ion 40A BMS Board 80A Over Current

Nominal Voltage: 11.1VRds (on): 3mRContinous Current: 40AOver Current Protection: 80ATypical Performance (per cell)Overcharge Protection Voltage: 4.3VOver-Charge Recovery Voltage: 4.15VOver-Discharge Recovery Voltage: 3.2VOver Discharge Protection: 2.5VReminder:Always put a heavy capacitor (>100uF/2..

₱109.00

-17%

2-Ch 12V Relay Module

12V 2 Channel Optoisolated Relay ModuleWorking Voltage: 12VRelay Contact Ampacity: 10ATrigger Level: Active Low..

₱75.00 ₱90.00

ESP32-CAM + MicroUSB to Serial Board Wifi Cam Development

Wifi/Bluetooth Camera Development Module with MicroUSB to serial interface board.ESP32-CAM- 4.75-5.5V Operating Voltage- Dual Core 32-bit MCU- 240MHz 600DMIPS processing speed- OV2640 2MP camera module- TF card socketmicroUSB to Serial Interface Board- CH340G USB BridgePackage:1x ESP32-CAM Board1x O..

₱549.00

UV Detection Sensor Module Analog Output 240nm-370nm CJMCU-GUVA-S12SD

This product allows UV intensity measurements at low cost and is sensitive to the 240nm-370nm Ultraviolet Light spectrum.Operating Voltage: 3.3V to 5VDCOutput Signal : AnalogSpectral Detection: 240-370nmActive Area: 0.076mm^2Dark Current: 1nASensitivity: 0.14A/WLight Current: 101 to 125nA @ 1mW/cm^2..

₱199.00

12VDC to 220V AC/DC Converter Module

This product is meant to power a limited selection of 220VAC rated devices from a 12VDC source. It has high voltage AC and DC output ports that can be used to power a limited selection of 220VAC devices. Many people find this device useful as step-up converter in low power solar installations.Import..

₱125.00