This module contains two independent PIR sensors laid out side by side in a horizontal viewing angle. This sensor offers several advantages over the cheaper and widely available single sensor versions. It can detect not just motion; the general location and movement direction can be resolved as well..
Time of Flight Distance laser ranging module.Range: Up to 2M when used indoor.Accuracy: +/-5% At 1.2M, high speed mode, +/-3% in high accuracy mode.Supply Voltage: 3-5VDCI/O Interface: I2CPin Functions:VIN - Supply Voltage (+)GND - Power and signal groundSCL - I2C ClockSDA- I2C DataGP101 - Interrupt..
The **GP2Y1014AU** is a tiny six-pin analog output optical air quality/optical dust sensor that is designed to sense dust particles in the air. It works on the principle of laser scattering. Inside the sensor module, an infrared emitting diode and a photosensor are diagonally arranged near the air i..
TP4056-1A Li-Ion 1S Battery Charger Modulewith Type C USB connector port.With built-in BMS over current and undervoltage protectionUSB Port Type: Type CCharging cut-off Voltage: 4.2V +/- 1%Maximum Charging Current: 1ABattery Overcurrent Protection: 3ABattery Over Discharge Protection: 2.5V..
This product is a high-efficiency DC-DC Step Down Converter configured as a Dual Output Charger.Input Voltage Range: 6-26VDCOutput Voltage: 5.2VOutput Current: 2A Total Max. (3A if you mount a heatsink)Warning: This product will be permanently damaged if the power input is connected in the wrong pol..
This product is a high-efficiency DC-DC Step Down Converter. It can be used as a power supply or charger module.Input Voltage Range: 4-38VDCOutput Voltage Adjustment Range: 1.25-36VDCOutput Current: 5A Max.Output Power: 75W MaxEfficiency: Up to 96%Protection: Thermal Shutdown & Output short circuit...
3S 20A Li-ion Battery Charger BMS Protection with Recovery FeatureSuitable for 3x 18650 batteriesCharging Voltage cutoff: 3.7V-4.3V per cellDischarging Voltage cutoff: 2.3-3.0VCurrent: 20A maximum..
With this product, You can easily build a DIY power bank from a single 3.7V Lithium Ion battery. - Integrated charging and dsicharge management.- High temperature shutdown protection.- Output short circuit and over voltage protection.Input Voltage: 3.7V-5.5VDCInput Low Voltage Cutoff: 2.9VCharging C..
This product will work even with 1 cell niMH battery. Output current capacity varies with the input voltage, with higher voltage resulting with higher efficiency and available current output.Operating Input Voltage: 0.9V-5VmaxConversion Efficiency: up to 96%Output Port: USB FemaleCaution: Module may..
Kenwood-inspired Car Amplifier4-ch Class AB Amplifiers with built-in Bipolar Power Supply converter.Bass (LPF) and Treble (HPF) Boost switch.Switch selectable and adjustable Low Pass (LPF) and High Pass (HPF) Filters.Manufacturer given specs:Power Input: 15VDC MaximumFuse: 30ATHD: 0.01%Signal to Noi..
This kit consists of a wireless remote control keychain and a single channel relay receiver module that requires an external 12VDC source to operate.Operating Frequency: 433MHzReceiver Module Operating Voltage: 12VDC NominalRelay output: 5A 220VACControl distance: 100M typical, line of sight (no obs..