All Products

Genuine TowerPro SG5010 Operation Voltage: 4.8V - 6V DCAverage Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)Torque: At 5V, 5.5kg-cm, and at 6V 6.5kg-cmRotation Range: 160 degrees..

Good quality low cost equivalent to TowerPro SG90 ServomotorVoltage 4.8-6V (5V typical)Torque : 2.5 kg-cmSpeed : 0.1 secWeight : 14.7 gramsDimensions: L23xW12xH32mmPackage:1x SG90 Servomotor1x Accessories..

Low-cost USB programmer for ATMEL AVR microcontrollers with ISP features based on Thomas Fischl USBasp and METALAB AVRProg. This clone implements the AVRProg version that has a 1MHz clock source that users can use to recover chips with wrong clock fuse settings. Supported by the following programmi..

Real Time Clock is a low power, full BCD clock/ calendar plus 56 bytes of nonvolatile SRAM. Address and data are transferred serially via a 2-wire bi-directional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatical..

Although made primarily as a control for the e-Gizmo Audio Preamplifier kit, it is in fact an Arduino based board you can program yourself (using Arduino IDE) to add customize functions, or program and use for an entirely different application. Fitted with encoder switch for adjustment controls and ..

The output expander module is in reality a serial to parallel converter with 8 output ports per board. Each output ports have LED state indicators. Up to 10 modules can be cascaded to build up to 80 additional output ports with the use of just 3 microcontroller I/O ports. Works with 3.3V and 5V logi..

The input expander module allows addition of 8 or more inputs . Each input is monitored with buffered LED indicators. Up to 10 modules can be cascaded to build up to 80 additional input ports with the use of just 3 microcontroller I/O ports. Works with 3.3V and 5V logic. Specifications :Power In..

The new e-Gizmo 4x2 LED Display Module is a 3-in-1 LED display, timer, and counter. A standalone module that is easy to use for numerical displays. It comes with switch buttons, serial function connections and has 4 different function modes for counter and a simple countdown timer. Specifications :..

e-Gizmo 4 Digit 7 Segment Display v2 is based on LD1207 serial to parallel chip. Each segment is bit mapped to a corresponding register. This allows you to display your own display pattern. Compatible with gizDuino/Arduino boards. Specifications :Power Input 5VDCData Interface 3-Lin..