All Products
For Restocking
Brand: tower
Genuine TowerPro SG5010 Operation Voltage: 4.8V - 6V DCAverage Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)Torque: At 5V, 5.5kg-cm, and at 6V 6.5kg-cmRotation Range: 360 degrees (continous rotation)..
₱455.00
Brand: Tower Pro
Genuine Tower Pro MG995 ServomotorOperation Voltage: 4.8V-6V
Torque:4.8V: 130.54 oz-in (9.40 kg-cm)
6.0V: 152.76 oz-in (11.00 kg-cm)Speed: 4.8V: 0.16 sec/60°6.0V:
0.20 sec/60°4.8V:Gear: MetalRotation Range: 160°..
₱720.00
Brand: Tower Pro
Genuine TowerPro SG5010 Operation Voltage: 4.8V - 6V DCAverage Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)Torque: At 5V, 5.5kg-cm, and at 6V 6.5kg-cmRotation Range: 160 degrees..
₱435.00
Hot
Brand: Tower Pro
Good quality low cost equivalent to TowerPro SG90 ServomotorVoltage 4.8-6V (5V typical)Torque : 2.5 kg-cmSpeed : 0.1 secWeight : 14.7 gramsDimensions: L23xW12xH32mmPackage:1x SG90 Servomotor1x Accessories..
₱89.00
-54%
Low-cost USB programmer for ATMEL AVR microcontrollers with ISP features based on Thomas Fischl USBasp and METALAB AVRProg. This clone implements the AVRProg version that has a 1MHz clock source that users can use to recover chips with wrong clock fuse settings.
Supported by the following programmi..
₱120.00 ₱262.00
Brand: e-Gizmo
Real Time Clock is a low power, full BCD clock/ calendar plus 56 bytes of nonvolatile SRAM. Address and data are transferred serially via a 2-wire bi-directional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatical..
₱189.00
-51%
Brand: e-Gizmo
Although made primarily as a control for the e-Gizmo Audio Preamplifier kit, it is in fact an Arduino based board you can program yourself (using Arduino IDE) to add customize functions, or program and use for an entirely different application. Fitted with encoder switch for adjustment controls and ..
₱320.00 ₱650.00
Brand: e-Gizmo
The output expander module is in reality a serial to parallel converter with 8 output ports per board. Each output ports have LED state indicators. Up to 10 modules can be cascaded to build up to 80 additional output ports with the use of just 3 microcontroller I/O ports. Works with 3.3V and 5V logi..
₱210.00
Brand: e-Gizmo
The input expander module allows addition of 8 or more inputs . Each input is monitored with buffered LED indicators. Up to 10 modules can be cascaded to build up to 80 additional input ports with the use of just 3 microcontroller I/O ports. Works with 3.3V and 5V logic.
Specifications :Power In..
₱210.00
-50%
Brand: e-Gizmo
A clone of the immensely popular Microchip PicKit2 hardware development kit. It is programmer and debugger rolled into one. Supports incircuit programming and debugging of almost any PIC16F and PIC18F microcontroller variants. Connects to a PC via USB a port where power to the circuits is also drawn..
₱575.00 ₱1,150.00
Ship in 1-3 days
Brand: e-Gizmo
"The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff. It's got a bunch of features an intrepid hacker might need to prototype their next project. This manual is an effort to link all available Bus Pirate information in one place."..
₱1,100.00
-10%
Brand: e-Gizmo
32 columns x 8 rows, 5mm diameter LED Dot Matrix Display module. Column drivers are on-board. Can be cascaded (up to 4 feet total length) to construct long message display.
Demo Video :
*This is an example animation features text display by sending the commands manually in PuTTytel Configuration
..
₱890.00 ₱990.00