All Products
Brand: e-Gizmo
This all-in-one mobile robot board consists of 3-channel line tracker sensor, 3 IR Proximity-Collision Sensor, and 2-channel DC motor driver and this board can be controlled by and Arduino Microcontroller Clones or boards. With open circuit design for prototyping and interfacing means.This boar..
₱1,850.00
Brand: e-Gizmo
PBOT's Dedicated Line Array sensor composed of 3 CNY70 Photo electric sensor that is applicable for line tracing robots.
Note : This Sensor is Compatible with e-Gizmo PBOT Board. ..
₱99.00
-69%
Brand: e-Gizmo
Works with 8V - 35VDC input. Efficient switching operations allows full load operation without heatsink even with high input-output voltage differential. Made to order. 3.3V to 24VDC output and up to 80VDC input available.
Specifications :Power Input
8 ~ 24VDC Power Output
3.3VDC..
₱85.00 ₱275.00
-19%
Ship in 1-3 days
Brand: e-Gizmo
Audio Amplifier Module built on LM3886 chip, a high performance, high fidelity amplifier very popular in the DIY Audio world.Note: Must be mounted on a heatsink. Heatsink is sold separately
Sample ApplicationSpecifications :Power Input
+/-29VDC Power Output
@ 1% THD 68W sin..
₱450.00 ₱557.00
-39%
Brand: e-Gizmo
Negative supply from a +5V source. Output adjustable from -5 to -15VDC, and is usable up to -20VDC but at a reduced power output and efficiency. 1.7W output @ -10VDC output. Three terminal negative voltage regulator pin layout.Specifications :Power Input5 ~ 10VDC Power OutputAdjustable, -..
₱85.00 ₱139.00
-46%
Brand: e-Gizmo
Adjustable output from single +5V supply. Output is adjustable from =Vin to +24VDC. 3W @ +15V output, 2.4W @ +24VDC output. Three terminal positive voltage regulator pin layout.
Specifications :Power Input
5 ~ 10VDCPower Output
Adjustable, 0 to 24VDC ( Max ) 2.4W TypicalTopology..
₱75.00 ₱139.00
-30%
Brand: e-Gizmo
A high fidelity stereo amplifier built on car audio LA4708 chip. This BTL amplifier is capable of delivering up to 20W per channel when operated with 13.2 VDC source (i.e. fully charged automotive battery). Although primarily designed for car audio (or motorcycle audio, if such thing exists), it wil..
₱275.00 ₱395.00
-43%
Brand: e-Gizmo
This kit packs enough power to make a great DIY amplifier/booster for your personal audio devices. When used with bookshelf loudspeakers, it can fill a fairly large room with loud and clear music. Experimenters will find this useful as a general purpose test amplifier on their workbench.Specificatio..
₱135.00 ₱238.00
WTV020-SD module is a reusable mass storage voice module. It supports a maximum capacity of 1GB via an SD card and can load WAV and AD4 audio. The voice module uses WTV020SD-20S as the core chip, MP3 control mode, one to one key control mode, power on loop control mode and the two-line serial contro..
₱350.00
For Restocking
ESP8266 is a complete Wi-Fi network where you can easily connect as a serving Wi-Fi adapter, wireless internet access interface to any microcontroller-based design on its simple connectivity through Serial communication or UART interface.Specifications :Power Input3.3V Operating voltage (ESP8266) Da..
₱300.00
Retired
Low cost compact ultrasonic sonar (distance measuring) sensor with up to 3.5-meters range. A host microcontroller circuit determines distance by triggering the US-100 and then measuring the echo time indicated by the pulse width output of the sensor. Temperature compensatured for accurate ranging ev..
₱258.00
-12%
Brand: e-Gizmo
e-Gizmo Light & Dark sensor can either respond to brightness or darkness at a flip of a switch. It's sensitivity is user adjustable via a single trimmer resistor. It has a digital output the activates when the ambient light is either too bright or too dark.Video :Specifications :Power Input5..
₱99.00 ₱112.00