Sensors and Detectors
Pre-order
This module is a basic AC Power measuring board that can return AC Voltage, Current, Power, PF and kWh readings of a AC power installation under test.AC Voltage Range: 80-260VACCurrent Capacity: 100APower Measurement: 22kVA maximumKwh: 9999kWhLine Frequency: 45-65HzData Port: Optoisolated TTL UARTCo..
₱565.00
Pre-order
MH-ET LIVE is an embedded 1D/2D BarCode reader with UART port for easy integration with your microcontroller based or Arduino Project.Port: UART (TTL) Interface, HID (Micro USB)Baud Rate: 9600 (default)1D Format: - UPC/BAN, EAN, ISSN, UCC, Code128, GS1-128, ISBT 128, Code 39, etc.2D Format: - QR Co..
₱1,250.00
3 axis accelerometer +3 axis gyroscopewith on-board Low Dropout Voltage Regulator.Sensor Chip: MPU-6500Power Supply: 3-5V DCCommunication Interface: I2C or SPIGyroscope Range: +/- 250, 500, 1000, 2000 degrees per secAcceleration Range: +/-2,4,8,16gADC and DAC Conversion: 16 bitsNumber of Pins: 10..
₱99.00
AS608 Optical Fingerprint Sensor Adafruit Library compatibleNote: This module will work only with 3.3V Supply and Logic Levels. It is level compatible with Rapberry Pi and most ARM based controllers. If you want to use this with 5V host controllers, level converter must be used on the TX and RX pin...
₱555.00
Pre-order
The VC-02 module, developed by Shenzhen Ai-Thinker Technology Co., Ltd., is a low-cost pure offline speech recognition module. It utilizes the voice chip US516P6, which was launched by Unisound. This module is designed for high reliability and versatility. Some key features include:Single MIC Access..
₱615.00
4-Levels 1S to 8S Lithium-ion Battery Charge Indicator Module.- Jumper (solder pads) selectable configuration.Jumper Setting:Apply solder bridge to any one of solder pads marked S1 to S8 corresponding to 1S-8S configuration.Important: Ensure that only one solder pads is solder shorted. Bridging more..
₱79.00
This product is a commercial quality single channel PIR motion sensor with White Fresnel lens. It is most sensitive on an axis aligned at the center of the lens perpendicular to the pcb board.Supply Voltage: 5V to 9VDCDetection Range*: >2 metersSensitivity Adjustment: NoneI/O Connector: 3 pin Wafer ..
₱69.00
This simple soil moisture probe has a trimmer presetable digital output that goes to logic low whenever the soil moisture value exceeds the preset level.It also has an analog voltage output that generates a voltage in inverse proportion to the soil moisture content. This output then allows the user ..
₱49.00
This simple rain/water sensor detects the presence of water by presenting an ohmic resistance at its output caused by water bridging its conductive probes. The amount or level of water can be estimated and is inversely proportional to the resulting resistance.Operating Voltage: 3-5VDCOutput: Analog ..
₱20.00
This module is a basic AC Power measuring board that can return AC Voltage, Current, Power, PF and kWh readings of a AC power installation under test.AC Voltage Range: 80-260VACCurrent Capacity: 100APower Measurement: 22kVA maximumKwh: 9999kWhLine Frequency: 45-65HzData Port: Optoisolated TTL UARTCo..
₱545.00
The ZMPT101B voltage sensor module is capable of measuring AC voltages in the range of 0 to 250V. It provides a convenient and reliable way to interface AC voltages with microcontrollers or other digital systems, as it outputs a corresponding analog voltage signal that can be easily read by these de..
₱135.00
This product is a very simple divide-by-5 resistor voltage divider module that allows easy and safe interfacing of input voltages up to 25VDC to an MCU (arduino) ADC input channel.Output to input ratio: 5Tolerance: 1%Input Resistance: 36.9KInput : VCC-GNDOutput : S & -Note: "-" terminal = GND, "..
₱36.00