New Arrivals Kits and Modules

ESP-32 ESP32 WROOM-32E CH340G Nodemcu

NodeMCU-32SESP32-WROOM-32E IOT Development BoardWROOM-32E is newer updated variant of 32D32-bit RISC-V MCU with Wifi and Bluetooth- 4MB Flash- 38 pins- MicroUSB PC Connectivity- 5V Power Supply- CH340G USB Bridge..

₱349.00

MT3608 Adjustable 2A Boost Converter Module 28V max Output

2-28V 2A Adjustable Boost ConverterOperating Input Voltage: 2-24VMaximum Current: 2A (Note: Max current falls proportionaly with increasing output voltageMaximum Output Voltage: 28VCoversion Efficiency: 93% Typical..

₱33.00

LM386 Audio Power Amplifier Module Mono 1 CH 5-12V

LM386 based Audio Amplifier ModuleSupply Voltage: 5V-12VDCPower Output: 125mW @ 6V 8-ohms loadOn board Volume Control: 10K Trimmer PotentiometerPower ON Indicator: LED..

₱48.00

Humidifier Atomizer Mist Maker Kit Module Continous Mode

DIY ultrasonic mist maker/ Humidifier kit.Continous Operation - Operates as long as power is applied.Power input: 4.5-5.5V DCInput Current: 500mA max.Power Port: USB Type CAtomizer aperture: 5umUltrasonic Frequency: 108kHzPiezo Element: 20mm diameterOutput Power: 2WKit contains:1x Driver Module1x At..

₱99.00

5V Delay Timer Delay Relay Module (ON Delay) with NE555 IC

NE555 based Delay Timer Relay Module.- User pre-settable time delay.- Normally open, N.O. And Normally Close, N.C. Relay contact.The N.O. Contact closes (and N.C. Opens) after the preset time on the application of power.Operating Voltage: 5V DCDelay Time: 0-10s TypicalLoad Capacity: 10A maximum, 250..

₱55.00

6V-24V to 5V 3A DC/DC Step Down Buck Converter Charger with USB port

5V 5A USB Charging Port DC-DC Converter ModuleInput Port: Screw Terminal + DC JackOutput Port: Screw Terminal + USB Charging PortInput Voltage: 6V-36VDCOutput Voltage: 5.2VOutput Current : 3A Maximum with heatsink, 2A no heatsink.Efficiency: 97% max.Idle current: 0.85mASwitching Frequency: 500kHzOut..

₱39.00

4 Channel Bi-directionalLevel Translator Module 3.3V 5V

4 Channel Bi-directionalLevel Translator Module 3.3V 5V

Brand: e-Gizmo

A 4-channel bi-directional logic level translator is a device that converts voltage levels between different logic circuits, such as from 5V to 3.3V, or vice versa, while maintaining signal integrity.It features four independent channels, each capable of handling signals in both directions, allowing..

₱19.00

XH-M609 Low Voltage Disconnect Protection 12V-36V Battery

The XH-M609 is a low voltage disconnect switch designed for DC 12V-36V batteries, including lithium-ion batteries. It acts as a protection module, preventing batteries from over-discharging, which helps extend battery life.Key Features: - Automatic shut-off when voltage drops below a set threshold..

₱135.00

XH-M603 Charging Voltage Disconnect Protection 12V-24V Battery

The XH-M603 is a battery charging control module designed for 12V to 24V storage lithium batteries. It features a digital LED display for real-time voltage monitoring and includes protection mechanisms from high charging voltage as preset by the user. This module is ideal for DIY projects and profes..

₱162.00

PZEM-004T Multi Function AC Power Measurement Module with Case 100A CT

PZEM-004T Multi Function AC Power Measurement Module with Case 100A CT

Pre-order

This module is a basic AC Power measuring board that can return AC Voltage, Current, Power, PF and kWh readings of a AC power installation under test.AC Voltage Range: 80-260VACCurrent Capacity: 100APower Measurement: 22kVA maximumKwh: 9999kWhLine Frequency: 45-65HzData Port: Optoisolated TTL UARTCo..

₱565.00

USB Type C Female to SIP-4 Breakout Board

The USB-C Socket to SIP-4 Breakout Board is a compact and versatile adapter that allows you to easily interface a USB-C connection with a 4-pin SIP (Single Inline Package) header. Ideal for DIY projects, prototyping, and custom electronics, this breakout board offers a convenient way to convert USB-..

₱14.00