Sensors and Detectors

3 axis accelerometer +3 axis gyroscopewith on-board Low Dropout Voltage Regulator.Sensor Chip: MPU-6500Power Supply: 3-5V DCCommunication Interface: I2C or SPIGyroscope Range: +/- 250, 500, 1000, 2000 degrees per secAcceleration Range: +/-2,4,8,16gADC and DAC Conversion: 16 bitsNumber of Pins: 10..

AS608 Optical Fingerprint Sensor Adafruit Library compatibleSupply voltage: DC 3.3VSupply Current: Current:..

The VC-02 module, developed by Shenzhen Ai-Thinker Technology Co., Ltd., is a low-cost pure offline speech recognition module. It utilizes the voice chip US516P6, which was launched by Unisound. This module is designed for high reliability and versatility. Some key features include:Single MIC Access..

4-Levels 1S to 8S Lithium-ion Battery Charge Indicator Module.- Jumper (solder pads) selectable configuration.Jumper Setting:Apply solder bridge to any one of solder pads marked S1 to S8 corresponding to 1S-8S configuration.Important: Ensure that only one solder pads is solder shorted. Bridging more..

This product is a commercial quality single channel PIR motion sensor with White Fresnel lens. It is most sensitive on an axis aligned at the center of the lens perpendicular to the pcb board.Supply Voltage: 5V to 9VDCDetection Range*: >2 metersSensitivity Adjustment: NoneI/O Connector: 3 pin Wafer ..

This simple rain/water sensor detects the presence of water by presenting an ohmic resistance at its output caused by water bridging its conductive probes. The amount or level of water can be estimated and is inversely proportional to the resulting resistance.Operating Voltage: 3-5VDCOutput: Analog ..

This module is a basic AC Power measuring board that can return AC Voltage, Current, Power, PF and kWh readings of a AC power installation under test.AC Voltage Range: 80-260VACCurrent Capacity: 100APower Measurement: 22kVA maximumKwh: 9999kWhLine Frequency: 45-65HzData Port: Optoisolated TTL UARTCo..

The ZMPT101B voltage sensor module is capable of measuring AC voltages in the range of 0 to 250V. It provides a convenient and reliable way to interface AC voltages with microcontrollers or other digital systems, as it outputs a corresponding analog voltage signal that can be easily read by these de..

This product is a very simple divide-by-5 resistor voltage divider module that allows easy and safe interfacing of input voltages up to 25VDC to an MCU (arduino) ADC input channel.Output to input ratio: 5Tolerance: 1%Input Resistance: 36.9KInput : VCC-GNDOutput : S & -Note: "-" terminal = GND, "..

The SW-420 Vibration Module is a sensor used to detect vibration or accelerated motion. It produces a logic high output whenever it detects motion. The module is commonly used in industrial machinery and electronic devices to monitor vibration levels. It is capable of detecting acceleration in all d..