Operational Amplifier

Dual rail to rail opampsMfr: TIChannel: 2Supply Voltage: 4.5 to 16VDC (+/-2.25 to +/-8V)Input Offset Voltage: 390-1900uVTemperature Coefficient of Input Offset Voltage: 1.2uV/CInput Common Mode Voltage Range: 0 to 3.0V @ 5VDCCommon Mode Rejection Ratio: 110dBPower Supply Rejection Ratio: 100dBGain B..

The NCS325 is a CMOS operational amplifiers providing precision performance. The Zero-Drift architecture allows for continuous auto-calibration, which provides very low offset, near-zero drift over time and temperature, and nearflat 1/f noise at only 35 A (max) quiescent current. These benefits make..

- Low Offset Voltage: 10µV (MAX)- Open-Loop Voltage Gain: 150dB (TYP)- PSRR: 150dB (TYP)- CMRR: 140dB (TYP)- Input Voltage Noise Density: 10nV/vHz at 1kHz- Gain-Bandwidth Product: 8MHz- Slew Rate: 6V/us- Overload Recovery Time: 0.7µs- Rail-to-Rail Output Swing- Output Short Circuit Current: 70mA Typ..

The AMC1200 and AMC1200B are precision isolation amplifiers with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is resistant to magnetic interference.• Very Low Nonlinearity: 0.075% Maximum at 5 V • ±250-mV Input Voltage Range Optimized for Shunt Resistors • Lo..

Wide power supply range, bipolar or single supply, general purpose OPAMP. Equivalent to LM358.Manufacturer: ToshibaPower supply: +/-18 or 36VDC MaximumSource Current: 40mA Typ.Sink Current: 20mA Typ.Slew Rate: 0.8V/usUnity Gain Bandwidth: 1.5 MHz Package/Image: DIP-8..

With a 5 MHz unity-gain frequency and a guaranteed 1.4 V/µs slew rate, the quiescent current is only 220 µA/amplifier (2.7 V). They provide rail-to-rail (R-to-R) output swing into heavy loads (600 ? Guarantees). The input common-mode voltage range includes ground, and the maximum input offset voltag..

Dual,Low Noise, Precision 16V Opamp- CMOS Rail-to-Rail Dual Amplifiers- Low offset voltage: 175 µV maximum at VSY = 5 V- Low supply current: 275 µA maximum per amplifier- Single-supply operation: 5 V to 16 V- Low noise: 23 nV/vHz- Low input bias current: 300 fA- Unity-gain stable Package/Image: SOI..

QUAD OPERATIONAL AMPLIFIER Package/Image: DIP-14..

Low Power Quad OPAMPGBW: 1.3MHzVCC: 3V to 30V Package/Image: TSSOP-14..

These devices are the most cost- effective solutions for applications where low-voltage operation, space saving, and low cost are needed.Channel: 2Maximum Supply Voltage: 5.5VSingle Supply Operation Supply Voltage: 2.7-5.5VCharacteristics @ 2.7V Supply VoltageInput Offset Voltage: 1.7-7mVTemperature..

Low noise Hig speed Precision OPAMP27V/us Slew Rate 5.9MHz Package/Image: SOIC-8..

The TS616 is a dual operational amplifier featuring a high output current of 410 mA. This driver can be configured differentially for driving signals in telecommunication systems using multiple carriers.Manufacturer: STChannel: 2Maximum Supply Voltage: +/-7 VSingle Supply Operation Supply Voltage: V..