Optocouplers

The EL816 series of devices each consist of an infrared emitting diodes,optically coupled to a phototransistor detector. Maximum Ratings:InputForward Current: 60mAPower Dissipation: 100mWOutput:Collector Emitter Voltage: 80VCollector Current: 50mAPower Disiipation: 150mW Operating Characteristics:In..

The EL816 series of devices each consist of an infrared emitting diodes,optically coupled to a phototransistor detector. Maximum Ratings:InputForward Current: 60mAPower Dissipation: 100mWOutput:Collector Emitter Voltage: 80VCollector Current: 50mAPower Disiipation: 150mW Operating Characteristics:In..

The K1010 series consist of an infrared emitting diode, optically coupled to a phototransistor detector. This device is equivalent to EL817B. Maximum Ratings:InputForward Current: 50mAPower Dissipation: 70mWOutput:Collector Emitter Voltage: 80VCollector Current: 50mAPower Disiipation: 150mW Operatin..

The TLP265J consists of a non zero crossing photo triac, optically coupled to an infrared LED. The TLP265J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance of 5.0 mm (min) andinsulation thickness of 0.4 mm (min). Therefore, the TLP265J meets the reinforced..

Original Toshiba TLP385-GRTLP385 is a photocoupler of high isolation type that consists of phototransistor optically coupled to an infrared LED in a 4-pin SO6L package.TLP385 is guaranteed high isolation voltage (5000 Vrms).TLP385 has a small and thin package compared with a standard DIP package.Emi..

Original ONsemi FOD817.The FOD817 Series consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 4-pin dual in-line package.Emitter Forward Current: 50mA max.Detector Vceo: 70VDetector Current: 50mA mx.CTR: 130-250%Cut off Frequency: 80kHz Package/Image: DIPGW-4..

The Broadcom® HCNW22XX are optically coupled logic gates. The HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminating the need for additional waveshaping.Recommend..

FEATURES: Compliance Halogen Free(Br < 900 ppm, Cl < 900 ppm, Br + Cl < 1500 ppm)• Current transfer ratio(CTR: 50-600% at IF = 5mA, VCE = 5V)(CTR: 63-320% at IF = 10mA, VCE = 5V)• High isolation voltage between input and output (Viso =5000 V rms )• Compact 4 Pin SOP with a 2.0 mm profile• Compliance..

The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pindual in-line packageCTR: 20 min.Emitter Input Current: 100mA max.Detector:Vceo: 30VVce Saturation Voltage: 0.5V @ If 50mATon: 2usToff:2us..

FEATURES:- AC Input Response- High current transfer ratio (CTR = 100 % TYP.- High isolation voltage (BV = 3 750 Vr.m.s.)-Small and thin (SOP-4) package- High-speed switching (tr, tf = 5 µs TYP.)- UL Approved..

High speed 10MBd Data optoisolatorFeatures:Ultra low IDD current: 1.3mA maxLow input current: 1.6mA minBuilt-in slew-rate controlled output20 kV/µs min Common Mode Rejection (CMR) at VCM = 1000 VHigh Speed: 10 MBd minExample Applications:Communication Interface: RS485, CANBus, I2CMicroprocessor Syst..

Optocoupler Transistor OutputVceo: 80VDCCTR: >100%If: 60mASwitching Characteristics at RL=1.9Kton - 1.5usts - 25ustoff - 50us Package/Image: SMD-4..