e-Gizmo Store
Store Hours
We are open from 10:00AM to 7:00PM, Mon-Sat. Store schedule during holidays may vary, and are announced a few days before.
Author:
Last update: 2018-04-14 10:38
in your online shop, what does it mean when the product has: "for-restocking" or "pre-order" in the picture?
This entry is in revision and can not be displayed.Author: Keanu Berches
Last update: 2021-04-27 08:21
e-Gizmo Kits & Modules » gizDuino » gizDuino Mini
What should i select on Arduino IDE board list (with gizDuino Patch), if i am using the gizDuino mini?
Select the Gizduino (mini) w/ ATmega328 or Gizduino (mini) w/ ATmega168.Author: Roma Mercado
Last update: 2018-04-18 05:09
How can i connect the gizDuino mini to PC?
You need USB to UART - TTL converter.Author: Roma Mercado
Last update: 2018-04-18 05:14
What is the input supply of gizDuino mini?
The input supply is 5VDC.Author: Roma Mercado
Last update: 2018-04-19 11:22
e-Gizmo Kits & Modules » gizDuino » gizDuino 5
What is Gizduino?
Gizduino is a microcontroller board based on the ATmega328 and ATmega168. It has 14 digital input/ouput pins, 6 analog inputs. With a 16 Mhz crystal oscillator, USB connector, power jack for external power supply, an ICSP, and a reset button. Simply connect it to a computer with a USB cable to power it with to a AC-to-DC adapter or battery to use it.
It is an open source computing platform based on simple input/output board and the use of standard programming language. Gizduino is programmed using the IDE (Integrated Development Environment).
It is ideal for beginner programmers and hobbyist because it is very easy to use wherein it is a multi platform environment that can run on Windows, MAC OS, and Linux. It is programmable via USB cable to make it more accessible and allows communicating with the computer.
Author: Roma Mercado
Last update: 2018-04-17 04:04
How can I get GizDuino board?
You may visit our website: www.e-gizmo.net.
Contact our sales through Chat Online box or through email
Tel/Fax: (02)536-3378
Globe Mobile: (+63) 927 310 0534
Smart Mobile: (+63) 921 779 0748
Sun Mobile: (+63) 923 247 6502
We offer deliveries in Local places through LBC,JRS,LALAMOVE(Manila Area) here only in the Philippines and Store Pick-Up.
Our payments Options through Metrobank, Western Union, Palawan Express, Cebuana, MLhuillier, Globe Gcash, Smart Padala, and Paymaya.
We are open from 10AM to 7PM daily,except on Sundays & selected holidays.
Author: Roma Mercado
Last update: 2019-11-05 04:31
Can I make my own gizduino board?
Yes of course. The materials are available in our store if you want to build on your own.Author: Roma Mercado
Last update: 2019-11-05 04:29
Where do I go if I have questions/problem about gizDuino boards?
Visit the www.e-gizmo.net just contact our technical supports via chat online or through e-mail ! Your questions are welcome here so don’t be shy.Author: Roma Mercado
Last update: 2019-11-05 03:50
Is gizDuino (V and up) compatible with Arduino Uno?
Yes. It uses the same chip (ATMEGA328) as the Arduino Uno, hence it is 100% code compatible - if it runs on Arduino Uno, it will run as well with a gizDuino.Author: Administrator
Last update: 2018-04-17 10:45
What board (on Arduino IDE) should I select when working with gizDuino 5?
If you succesfully installed gizDuino patch file for the Arduino IDE, "gizDuino 328" should appear in the selection. Click to select. Otherwise, simply select the "Arduino Uno(R3)" board.Author: Administrator
Last update: 2018-04-17 10:58
Is gizDuino (V and up) compatible with Arduino Uno?
Yes. It uses the same chip (ATMEGA328) as the Arduino Uno, hence it is 100% code compatible - if it runs on Arduino Uno, it will run as well with a gizDuino.Author: Administrator
Last update: 2018-04-17 10:56
What is the maximum voltage for gizDuino?
The required voltage for gizDuino to external power supply is from 7 - 12VDC.Author: Roma Mercado
Last update: 2018-04-18 04:15
Where can I download the PL2303 drivers for Gizduino version 4.0 to 5.0? Using Window XP/7/8/10?
Here's the Prolific website link: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
Direct download file: http://www.prolific.com.tw/UserFiles/files/PL2303_Prolific_DriverInstaller_v1190.zip
After you download the file, UNZIP and INSTALL it until you finished. Then restart your PC.
Troubleshoot:
If nothing happens?, Try "Disabling Signed Driver Signature Enforcement on Windows 8."
Link: https://learn.sparkfun.com/tutorials/disabling-driver-signature-on-windows-8/disabling-signed-driver-enforcement-on-windows-8
Watch this video:
https://youtu.be/dpevn9TohXYAuthor: Roma Mercado
Last update: 2018-04-18 04:32
How many Digital I/Os ,Analog Input and PWM pins of gizDuino V w/ATmega328?
gizDuino V ATmega328P (Arduino UNO compatible)
Digital I/O pins: 20 [ D0 to D19]
Analog Inputs: 6 [A0-A5]
PWM pins: 6 [D3,D5,D6,D9,D10,D11]
Also same pins with gizDuino ATmega168P.
Author: Roma Mercado
Last update: 2018-04-18 08:48
How to add the gizDuino patch file? In Windows OS?
gizDuno Patch file contains the list of all gizDuino boards.
If you already download an Arduino IDE from Arduino.cc website.
You can download the gizDuino Patch here: https://github.com/?q=gizduino (check the version of your IDE if its 1.0.x, 1.6x,1.8.x)
By adding the patch:
1. Unzip the file.
2. Copy "gizduino-" folder.
3. Go to Arduino IDE 1.8.x folder>hardware> paste the "gizduino-" folder.
4. Open the Arduino.exe application. [ Go to Tools> Boards>gizduino boards included]
Done!Author: Roma Mercado
Last update: 2018-04-18 09:12
What is the Flash Memory of gizDuino V with ATmega168P/328P?
The Flash Memory is 16KB/32KBytes.Author: Roma Mercado
Last update: 2018-04-19 11:40
avdude: stk500_getsync(): not in sync: resp=0x00? Using the gizDuino (mini) w/ ATmega328?
Add the patch files for gizDuino board list.
Also make sure the USB cable is connected properly, and the board you select is correct.
If nothing happens, contact our technical supports @ www.e-gizmo.net or email .
You can visit us in our store e-Gizmo Mechatronix Central Inc.
♦ 2/F VSC Building, 2313 Taft Ave, Malate, Manila
♦ Store Hours: 10:00AM to 7:00PM, Mon-SatAuthor: Roma Mercado
Last update: 2019-11-05 03:42
Both external power supply and USB are used in the gizDuino v3.2 connected, its that ok?
The new board does the power selection automatically.Author: Roma Mercado
Last update: 2019-11-05 03:49
e-Gizmo Kits & Modules » gizDuino » gizDuino miniUSB
How to install USBasp driver to PC? If you are using gizDuino miniUSB?
In order to use gizDuino USB mini, we need to install the USBasp driver. If there is no USBasp driver installed to your computer, a pop-up note will appear indicating "Found new hardware USBasp".
Download driver: http://e-gizmo.net/oc/kits%20documents/GIZDUINO%20FOLDER/Drivers.zip
1st Option:
1. Connect the gizDuino mini USB to PC.
2. Open Device Manager>Search the USBasp. (if there's a caution image- it means the driver is not installed properly or not detected.)
3. Right Click in USBasp>Update Drivers>Search automatically for updated driver software.
4. If nothing happens, select Browse my computer for driver software>locate the "usbasp-windriver.2011-05-28.",
then wait until Driver installation successful.
Done!Author: Roma Mercado
Last update: 2018-04-18 10:55
Another USBasp driver installation (option 2) for gizDuino miniUSB. Using Zadig driver.
Download the Zadig at : http://zadig.akeo.ie/
Connect the gizDuino miniUSB to PC.
Select: USBasp
Driver: libusbK(v3.0.7.0)
Click Install Driver.
Go to Device Manager> Search "libusbK USB Devices"> USBasp
(If usbasp appear and no caution image - it is success!)
You may now use the gizDuino miniUSB.Author: Roma Mercado
Last update: 2018-04-18 11:01
e-Gizmo Kits & Modules » gizDuino » gizDuino X
What type of USB port can be use to upload a program in gizDuino X?
You can use the Printer Cable (Type B to Type A) for your gizDuino X board.Author: Roma Mercado
Last update: 2018-04-18 11:09
How many Digital I/Os, Analog Inputs, and PWM pins of gizDuino X?
Digital I/O: 54
Analog Inputs: 8 [A0-A7]
PWM pins: 8 [D2,D3,D4,D5,D6,D7,D8,D9]Author: Roma Mercado
Last update: 2018-04-25 03:52
What is the Flash Memory of gizDuino X with ATmega1281?
The Flash Memory is 128 KBytes.Author: Roma Mercado
Last update: 2018-04-25 03:52
e-Gizmo Kits & Modules » gizDuino » gizDuino PLUS
How many Digital I/Os, Analog Inputs, and PWM pins of gizDuino PLUS?
Digital I/O: 32 [D0-D31]
Analog Input: 6 [A0-A5]
PWM pins: 6 [D4,D5,D6,D7,D9,D10]Author: Roma Mercado
Last update: 2018-04-19 11:25
What is the Flash Memory of gizDuino PLUS with ATmega164P/324P/644P?
The Flash Memory is 16KB/32KB/64KBytes.Author: Roma Mercado
Last update: 2018-04-19 11:39
e-Gizmo Kits & Modules » gizDuino » gizDuino IOT-644
What is IOT means?
Internet- Of-Things
~ the interconnection via the Internet of computing devices embedded in everyday objects, enabling them to send and receive data.Author: Roma Mercado
Last update: 2018-04-19 11:42
Is gizDuino IOT-644 perfect for a gizDuino connected to the internet via router/modem with internet connection? I want my gizDuino to be access through online (internet via cloud server) and through offline (via router/modem). Or should I use ethernet shield or a wifi shield instead?
gizDuino IOT-644 board has built-in Ethernet module Wiznet 5500. You just need to connect it the router to get access on to the server or internet.Author: Roma Mercado
Last update: 2019-04-08 12:39
e-Gizmo Kits & Modules » Wireless Devices » SIM800L Shield
Is the gizDuino SIM800L shield need to use an external power source?
Yes, it needs a 5V 2Amp power supply to work.Author: Roma Mercado
Last update: 2018-04-19 11:54
How will i know if there's a signal or not? (SIM800L)
The SIM800L module has one LED indicator for Power and Signal. The color of it is Green LED or some is Red in color.
Once you plug in the power supply the LED indicator will blink every 1 sec. After 5 seconds or more the LED indicator must be blinking every 2seconds interval - that means you have a signal. Make sure it has an antenna connected.Author: Roma Mercado
Last update: 2018-04-19 12:16
What is the difference between SIM900 and SIM800/L?
The SIM900 and SIM800/L are the same GSM module where it can also be use to send/received SMS and Call. They are same AT commands protocol. SIM800 is the latest module and it has a lots of new features. (See the Datasheet)Author: Roma Mercado
Last update: 2018-04-19 12:22
What size of SIMCard will i use for SIM800L Shield?
In SIM800L Shield you need a MICROSIM card size.Author: Administrator
Last update: 2018-04-21 04:54
What happens if the replies of SIM800L shield is not exact characters? (ex. if i send "Hello", then i received like this "
Check your codes, if you are using SoftwareSerial Library and the assigned pins to RX (D2),TX (D3). On the SIM800L shield there's a slide switch for serial select use SUART pin (2,3).Author: Administrator
Last update: 2018-04-21 08:22
e-Gizmo Kits & Modules » Wireless Devices » Bluetooth Shield
What is the Name and Password of the Bluetooth Shield?
Name: HC-05 (Default)
Password: 1234 or 0000 (Default)Author: Roma Mercado
Last update: 2018-04-19 12:34
Bluetooth configuration, sending AT commands via Serial Monitor.
Place a jumper pin in MODE.
Upload this code.
https://gist.github.com/e-Gizmo/fd8be52c32971e311f74
Baudrate: 9600 (default)
Once you've uploaded the code, use wires on the pin 0 (RX) connect it to pin 8 of Arduino/gizDuino and pin 1 (TX) connect it to pin 9. You can attach the BT shield on the power source to Arduino.
Open the Serial Monitor then set the baudrate 9600 and Both NL & CR.
"Ready for configuration " will show.
Type "AT "then SEND.
The response will be OK.Author: Roma Mercado
Last update: 2018-04-19 12:54
e-Gizmo Kits & Modules » Wireless Devices » ESP-11 Shield
How many GPIO pins in ESP-11?
It has two GPIO pins , the GPIO0 (Bootloader mode)and GPIO2.Author: Administrator
Last update: 2018-04-20 04:30
How many pins in ESP-11 module?
It has 8 pins.
View pinouts: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/esp%20pinouts.pngAuthor: Administrator
Last update: 2018-04-20 04:34
What is the Flash Size in bytes and (bits) of esp-11 module?
The flash size of esp-11 module is 512KB (4MB)
Reference link table: https://www.esp8266.com/wiki/doku.php?id=esp8266-module-familyAuthor: Administrator
Last update: 2018-04-20 04:35
What is the uploaded firmware in ESP-11 shield?
The "AT 9.2.2.bin" is the default firmware of ESP-11 shield.
On the sample application, it allows you to connect on the esp8266 module via WiFi Network. The code will send an AT commands to configure as access point, getting the IP address, configure for multiple connections and turn on server on port 80. It can also send messages or data into your page.
Download Firmwares: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/Firmwares/Author: Administrator
Last update: 2018-04-20 05:00
Where can i download the ESP8266 Flasher? and How to use it?
You can download in our website the ESP8266 Flasher.
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/ESP%20flasher.zip
Instruction on how to use the flasher:
ESP-11 Shield Manual: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/esp%20wifi%20shield%20manual%201rev0.pdf
Download Firmwares: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/Firmwares/Author: Administrator
Last update: 2018-04-20 05:29
Where can i download the NodeMCU Flasher? and How to use it?
You can download the NodeMCU Flasher in our website:
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/nodemcu-flasher-master.zip
Instructions on how to use the nodemcu Flasher:
LUA connect to wifi (as WEBSERVER).ppt downloads: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/LUA%20connect%20to%20wifi%20(as%20webserver).ppt
Firmwares link: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/Firmwares/Author: Administrator
Last update: 2018-04-20 05:35
How to connect the ESP-11 shield to Arduino MEGA 2560 using Serial 1?
Use Serial1 on the Arduino MEGA, instead of using the Software Serial library.
WiFi shield to Arduino MEGA wiring Connection (for Diagram Please see the Attachments file below)
• GND ---> GND
• D2 ---> D19
• D3 ---> D18
The Sample Sketch: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/Sample%20Code.zipAuthor: Administrator
Last update: 2018-04-25 05:37
e-Gizmo Kits & Modules » Wireless Devices » ESP-07 Shield
How many GPIO pins in ESP-07?
It has 10 GPIO pins including the ADC pin.Author: Administrator
Last update: 2018-04-20 04:39
What is the Input voltage of esp-07 module (esp8266) only?
Its 3.3VDC.Author: Administrator
Last update: 2018-04-20 04:41
What is the Flash size in bytes and bits in ESP-07?
It has 1MB (8MB) Flash size.Author: Administrator
Last update: 2018-04-20 04:43
How many pins in ESP-07 module?
It has 16 pins.
View pinouts: https://camo.githubusercontent.com/9587b73acb70dd31dc513b8c8185acea8d53e76d/687474703a2f2f692e696d6775722e636f6d2f49344972374e432e706e67Author: Administrator
Last update: 2018-04-20 04:45
e-Gizmo Kits & Modules » Wireless Devices » ESP-12 Shield
What is the uploaded firmware (default) in ESP-12/E Shield?
Based on the sample application, its esp_iot_sdk_v1.5.0 firmware that contains: a) bin\at\noboot\"eagle.flash.bin" - 0x00000, b) bin\at\noboot\"eagle.irontext.bin" - 0x40000, c) bin\"blank.bin" - 0xfe000, d) bin\"blank.bin" - 0x7e000
The firmwares are required to upload on the esp-07 module to be able use the "WiFiEsp library" in Arduino.
Software and Firmwares: https://www.e-gizmo.net/oc/kits%20documents/ESP8266%20ESP07or12E%20WiFi%20Shield/ESP%20softwares.zip
ESP-12/E Manual: https://www.e-gizmo.net/oc/kits%20documents/ESP8266%20ESP07or12E%20WiFi%20Shield/ESP8266%20ESP07or12E%20WiFi%20Shield.pdfAuthor: Administrator
Last update: 2018-04-20 08:31
e-Gizmo Kits & Modules » Sensor Modules » 3 Channel Line Tracker Sensor
What is the operating voltage of 3-Channel line sensor?
Its 5VDC. You can use the power source from gizDuino/Arduino.Author: Administrator
Last update: 2018-04-20 08:47
e-Gizmo Kits & Modules » Sensor Modules » 3-Axis Digital Accelerometer ( ADXL345 )
What is the Power Input of 3-Axis Digital Accelerometer ADXL345?
Its 3.3VDC. You can use the power source from gizDuino / Arduino.Author: Administrator
Last update: 2018-04-20 08:51
e-Gizmo Kits & Modules » Sensor Modules » 4 Direction / Tilt Sensor
What is the Operating voltage of 4 Direction/ Tilt Sensor?
The Power input is 3.3 to 5VDC. You can use the power source from gizDuino / Arduino.Author: Administrator
Last update: 2018-04-20 08:53
e-Gizmo Kits & Modules » Sensor Modules » 5 Channel Line Tracker Sensor
What is the Operating Voltage of 5Channel Line sensor?
Its 5VDC. You can use the power source from gizDuino/ Arduino.Author: Administrator
Last update: 2018-04-20 08:55
e-Gizmo Kits & Modules » Sensor Modules » AC Power Analyzer MK II with case
What is the Operational Voltage and Maximum Current load required of AC Power Analyzer II?
Electrical Operational voltage is 110V ~ 240V AC, 60Hz.
The Current Capacity is 8A continuous.Author: Administrator
Last update: 2018-04-20 08:59
What are the measures can AC power Analyzer II do?
• Real Power
• Apparent Power
• Reactive Power
• Fundamental & Harmonic Power
• Power Factor
• Volt rms
• Amp rms
• Watt-hr
• Plus a few more!Author: Administrator
Last update: 2018-04-20 09:05
Is there a Sample sketch for Arduino or gizDuino to get the measures?
Yes and the sketch is downloadable in our website.
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/Power%20Analyzer%202/Energy_Meter_II_Arduino_Sampe_Code.zipAuthor: Administrator
Last update: 2018-04-20 09:10
e-Gizmo Kits & Modules » Sensor Modules » ACS Current sensor (ACS-711T)
What is the Power input of ACS current breakout board?
Its 5VDC, You can use the power source from gizDuino/Arduino.Author: Administrator
Last update: 2018-04-20 09:13
Is this (ACS current sensor) compatible in Arduino/ gizDuino boards?
Yes it is! The ACS current sensor breakboard designed to interface with Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 09:16
Is this OK to use in 220VAC Power to measures the current A?
Based on the datasheet: https://www.e-gizmo.net/oc/kits%20documents/ACS71x%20Current%20sensor%20breakoutboard/ACS711-Datasheet.pdf
It is optimized for low-side current sensing application and it depends on the current capacity of the ACS IC.
The ACS711 - 05B can handle up to 5A current load. Therefore, it can be use in AC or DC working voltage application but in <100V , not 110~240VAC power source. (Caution: At your own risk)
We suggest AC Power Analyzer II were it is recommended for high current sensing up to 8A continuous.Author: Administrator
Last update: 2018-04-20 09:51
What are the other variants of ACS Current sensor breakout boards available?
•AC711T (12A) • ACS712T(5A)/(20A)/(30A) • AC713T(20A) • ACS714T(30A)Author: Administrator
Last update: 2018-04-20 09:54
e-Gizmo Kits & Modules » Sensor Modules » Bio-Amp Sensor Circuit
What is the Operating voltage of Bio-Amp sensor?
Its 12VDC. You need an external power supply.Author: Administrator
Last update: 2018-04-20 10:04
Where can i download the Bluetooth Terminal/Graphics App?
In Google Play store.
On your smart phone (Android), Go to Playstore search for Bluetooth Terminal/Graphics and Install.
Here's the link: https://play.google.com/store/apps/details?id=com.emrctn.BluetoothGraphics&hl=enAuthor: Administrator
Last update: 2018-04-20 10:12
e-Gizmo Kits & Modules » Sensor Modules » Compact IR Proximity-Collision Sensor
What is the Operating voltage of Compact Proximity?
Its 5VDC. You can use the power source from gizDuino/Arduino.Author: Administrator
Last update: 2018-04-20 10:16
What is the maximum distance range of Compact IR Proximity?
The maximum distance range of Compact IR Proximity is up to 2.8 inches. (72 mm Short range)Author: Administrator
Last update: 2018-04-20 10:18
What is the Output type?
The Output is Digital, 1 TTL active HIGH logic output.Author: Administrator
Last update: 2018-04-25 04:04
e-Gizmo Kits & Modules » Sensor Modules » Gas Sensor Kit ( MQ-2 )
What is the Operating voltage of GAS sensor kit?
Its 7 ~ 9V DC. You can use an external power supply (adaptor) connected to DC jack of gizDuino/Arduino then in power source VIN.Author: Administrator
Last update: 2018-04-20 10:26
What are the sensitivity measures of MQ-2 module?
Sensitive for Methane, Butane, LPG, Smoke.
This sensor is sensitive for flammable and combustible gasses.
Datasheet: http://duckduckgo.com/?q=%22mq-2%22+gas+sensor+filetype%3ApdfAuthor: Administrator
Last update: 2018-04-20 10:44
e-Gizmo Kits & Modules » Sensor Modules » Gas Sensor Kit ( MQ-5 )
What are the sensitivity measures of MQ-5 module?
Sensitive for Natural Gas, LPG, Alcohol.
Datasheet: http://duckduckgo.com/?q=%22mq-5%22+gas+sensor+filetype%3ApdfAuthor: Administrator
Last update: 2018-04-20 10:48
e-Gizmo Kits & Modules » Sensor Modules » Gas Sensor Kit ( MQ-7 )
What are the sensitivity measures of MQ-7 module?
Sensitive for Carbon Monoxide
Datasheet: http://duckduckgo.com/?q=%22mq-7%22+gas+sensor+filetype%3ApdfAuthor: Administrator
Last update: 2018-04-20 10:49
e-Gizmo Kits & Modules » Sensor Modules » Heart Rate Monitor Kit
What is the Operating Voltage of Heart Rate Monitor kit?
Its +5VDC, you can use the power source from gizDuino /Arduino.Author: Administrator
Last update: 2018-04-20 10:55
Is there an Arduino/gizDuino Sample sketch in (BPM)?
Yes , its downloadable in our website.
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/Heart%20Rate%20Monitor/Heart_Rate_BPM.zipAuthor: Administrator
Last update: 2018-04-20 10:58
e-Gizmo Kits & Modules » Sensor Modules » Light and Dark Sensor
What is the Input Supply of Light and Dark sensor kit?
Its +5VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 11:00
e-Gizmo Kits & Modules » Sensor Modules » Metal Detector kit ( Pulse Induction PI detection method )
What is the Operating voltage of Metal Detector kit?
Its 8 ~ 12VDC,
use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN.Author: Administrator
Last update: 2018-04-20 11:06
What is the maximum detecting range of Metal Detector kit?
It may be vary depending on the size of the materials/metal/aluminum.Author: Administrator
Last update: 2018-04-20 11:08
e-Gizmo Kits & Modules » Sensor Modules » Sensor Amplifier Kit
What is the Operating voltage of Sensor Amplifier kit?
Its 9~12VDC,use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN.Author: Administrator
Last update: 2018-04-20 11:14
e-Gizmo Kits & Modules » Sensor Modules » Smoke Sensor
What is the Operating voltage of Smoke sensor kit?
Its +9VDC, use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN.Author: Administrator
Last update: 2018-04-20 11:17
What is the Output type of Smoke sensor kit?
The Output is digital 0 (LOW) when smoke is detected.Author: Administrator
Last update: 2018-04-20 11:19
e-Gizmo Kits & Modules » Sensor Modules » Soil Moisture Sensor
What is the Operating voltage of Soil Moisture sensor?
Its 5VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 11:21
What is the Output type of Soil Moisture sensor?
It has Analog and Digital Output.
The Analog voltage value for • Dry Soil less than 350 • Moist Soil 745 ~ 350 • Watery Soil 950 ~ 745Author: Administrator
Last update: 2018-04-20 11:25
e-Gizmo Kits & Modules » Sensor Modules » Sound Activated Switch
What is the Operating voltage of Sound Activated Switch?
Its 5VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 11:27
e-Gizmo Kits & Modules » Sensor Modules » Temperature Control Unit Display
What is the Operating voltage of Temperature Control Unit Display?
Its 7~ 9VDC, use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN.Author: Administrator
Last update: 2018-04-20 11:29
What type of Temperature sensor used in TDU?
Its LM34 Temperature sensor.Author: Administrator
Last update: 2018-04-20 11:30
What is TDU?
Temperature Display Unit (TDU) is made for easy and fast measurement circuit temperature sensor, whose output voltage is linearly proportional to the Fahrenheit on its LM34 IC sensor then converted / calibrated directly in degrees celcius.Author: Administrator
Last update: 2018-04-20 11:31
Is there an Arduino/gizDuino sketch for TDU to get the value and calibration command?
Yes it is downloadable in our website.
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/Temperature%20Control%20Unit%20Display/TDU_Serialcode.zip
For Calibration command: https://www.e-gizmo.net/oc/kits%20documents/Temperature%20Control%20Unit%20Display/Temp_Display_Unit_Sample.zipAuthor: Administrator
Last update: 2018-04-20 11:37
e-Gizmo Kits & Modules » Sensor Modules » Through Beam Sensor
What is the Operating voltage of Through Beam sensor?
Its 5VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 11:42
What is the maximum distance range of Through Beam sensor?
The maximum distance range typically 1 meter.Author: Administrator
Last update: 2018-04-20 11:44
What is the Output type of Through Beam sensor?
The Ouput is Digital 1 (HIGH) when object is present.Author: Administrator
Last update: 2018-04-20 11:45
e-Gizmo Kits & Modules » Sensor Modules » Water Level Sensor
What is the Operating voltage of Water Level sensor kit?
Its 5VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 11:47
How many level in the Water Level kit?
It can sense up to 3 -Levels. Depends on the measured application.Author: Administrator
Last update: 2018-04-20 11:53
What is the Output type of Water level kit?
The Output is Digital.Author: Administrator
Last update: 2018-04-20 11:55
e-Gizmo Kits & Modules » Sensor Modules » 3-Axis Gyroscope Break-out Board
What is the Operating voltage of 3-Axis Gyroscope Break-out Board?
Its 3.3VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 11:57
What is the Data interface of 3-Axis Gyroscope Break-out Board?
Its Digital (I2C interface - 400KHz).Author: Administrator
Last update: 2018-04-20 11:58
e-Gizmo Kits & Modules » Sensor Modules » 6 Degrees of Freedom
What is the Operating voltage of 6 Degrees of Freedom?
Its 3.3VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 12:01
e-Gizmo Kits & Modules » Sensor Modules » APDS-9930 Digital Proximity & Ambient Light Sensor
What is the Operating voltage of APDS-9930 Digital Proximity & Ambient Light Sensor?
Its 3.3VDC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-20 12:04
e-Gizmo Kits & Modules » Sensor Modules » Coin Slot for ₱?1, ₱5, ₱10
What is the Operating voltage of Coin Slot for ₱?1, ₱5, ₱10?
Its +12VDC, use external power supply (adaptor) or connect it to DC jack of Arduino/gizDuino then in power source VIN.Author: Administrator
Last update: 2018-04-21 04:15
What is the Output type of Coin Slot for ₱1, ₱5, ₱10?
The Output is PWM, means its by pulse, if you insert ₱1 equivalent to 1 pulse, ₱5 equivalent to 5 pulses, ₱10 equivalent to 10 pulses.Author: Administrator
Last update: 2018-04-21 04:19
How to Calibrate the Coinslot for ₱1, ₱5, ₱10?
Here's the slide switch connections (Default)
MGN/NOM/• MAX (selected)
• NO (selected)/NC
Fast/• Medium (selected)/Slow
1. Power ON the coin slot (Input Supply 12VDC)
2. Press and Hold (2 secs) the SET button, and the 3 LED will blink.
3. Press and hold (2secs) the SET button, and the LED 1 will slowly blinking.
4. Put first the "1 peso coin" (20 x times) [ make sure the coin drops at the back of the coin slot] until the LED 1 will HIGH and the LED 2 is blinking fast.
(Note: If you already pressed the button once, then you drop the coin and Nothing happens.. Try it again by pressing and holding the button then drop again the coin. It must be drop at the bottom not on the eject coins)
5. The Press and Hold again the SET button (2 secs). The LED 1 is HIGH and the LED 2 is slowly blinking. Now put the " 5 peso coin" (20x times) until the LED 1 and 2 is HIGH and the LED 3 is blinking fast.
6. Lastly, Press and Hold the SET button (2secs). The LED 1 and 2 is HIGH, the LED 3 is blinking slowly. Then put the "10 peso" coin.(20x times) until the LED 1, LED 2, and LED 3 is HIGH.
after that you will see the 3 LEDs will turn off. Because the calibration is done well.
You can now use the coin slot.
Put the 1 (led1), 5(led2), 10 peso(led3).Author: Administrator
Last update: 2018-04-21 04:30
e-Gizmo Kits & Modules » Sensor Modules » Coinslot Single Coin
What is the Operating voltage of Coinslot Single Coin?
Its +12VDC, use external power supply (adaptor) or connect it to DC jack of Arduino/gizDuino then in power source VIN.Author: Administrator
Last update: 2018-04-21 04:35
e-Gizmo Kits & Modules » gizDuino » gizDuino PLUS 644 Starter Kit
What board should i select in Arduino IDE using gizDuino PLUS ATmega644P Starter kit?
Select the Gizduino + w/ ATmega644P. [Make sure your Arduino IDE has gizDuino Patch]Author: Administrator
Last update: 2018-04-21 04:42
e-Gizmo Kits & Modules » Wireless Devices » SIM800 Development Board
What is the Operating voltage of SIM800 Development Board?
It needs +5V 2Amp power supply to work.
Bandspeed Adaptor with 5V 2.6A:
http://www.e-gizmo.net/oc/index.php?route=product/product&product_id=46621Author: Administrator
Last update: 2018-04-21 04:48
What size of SIMCard will i use for SIM800 Dev board?
In SIM800 Dev board kit you need a Standard SIM card size.Author: Administrator
Last update: 2018-04-21 04:53
e-Gizmo Kits & Modules » Wireless Devices » SIM800L GSM Module Microsim Card Board
What is the Operating voltage of SIM800L module?
The required power supply (modem) is 3.4 ~ 4.4V (4.0V Typical) to work.Author: Administrator
Last update: 2018-04-21 04:59
Is this compatible in Arduino/gizDuino?
Yes, but you need to consider first what are the required power supply and other components for SIM800L module. (See the Datasheet)
SIM800L module's input power supply is 4.0V (3.4 ~ 4.4V) to make it work properly, also the serial logic communication of SIM800L is 3.3V output. Then we all know that Arduino/gizDuino is 5V powered and the serial pins output is 5V logic. Their serial communication is not compatible, so what we gonna do for that? You need a Voltage Translator. Which it can converts the voltage from HIGH toLOW or vice versa.
Multi-voltage level converter: http://www.e-gizmo.net/oc/index.php?route=product/product&path=59_66_103&product_id=16Author: Administrator
Last update: 2018-04-21 05:17
Is this compatible in Raspberry Pi?
Yes, the SIM800L Module is compatible in Raspberry Pi. It has 3.3V power supply also the serial logic to communicate.Author: Administrator
Last update: 2018-04-21 05:21
e-Gizmo Kits & Modules » Wireless Devices » GSM Remote I/O Kit
What size of SIMCard will i use for GSM Remote I/O Kit?
In GSM Remote I/O Kit you need a Standard SIM card size.Author: Administrator
Last update: 2018-04-21 07:45
What is the Operating voltage of GSM Remote I/O Kit?
It needs +5V 2Amp power supply to work.
Bandspeed Adaptor (5V 2.6A): http://www.e-gizmo.net/oc/index.php?route=product/product&product_id=46621Author: Administrator
Last update: 2018-04-21 07:47
What should i send via SMS, is there an examples (List of complete Remote Commands)?
Here's the Complete list of Remote Commands:
Click here: https://www.e-gizmo.net/oc/kits%20documents/GSM%20REMOTE%20IO%20KIT/summary%20commands.pngAuthor: Administrator
Last update: 2018-04-21 07:56
How about the example guide using GPS serial in GSMIO to get the latitude and altitude (GPS location)?
Here's the Setup using GPS Module/Shield in serial.
Wiring Diagram: https://www.e-gizmo.net/oc/kits%20documents/GSM%20REMOTE%20IO%20KIT/GSMIO-GPS%20interface%20connections.jpg
Setup: https://www.e-gizmo.net/oc/kits%20documents/GSM%20REMOTE%20IO%20KIT/sample%20guide%20using%20gps%20serial.jpgAuthor: Administrator
Last update: 2018-04-21 08:03
How to troubleshoot the GSMIO ( from Error replies)?
Here's the Error replies list from GSMIO. This will be the replies of GSMIO, if your message/text is wrong.
Click here: https://www.e-gizmo.net/oc/kits%20documents/GSM%20REMOTE%20IO%20KIT/Troubleshooting%20GSMIO.pngAuthor: Administrator
Last update: 2018-04-21 08:07
e-Gizmo Kits & Modules » Wireless Devices » GSM Shield ( SIM900D )
Is the gizDuino GSM SIM900D shield need to use an external power source?
Yes, it needs a 5V 2Amp power supply to work.
Bandspeed Adaptor (5V 2.6A): http://www.e-gizmo.net/oc/index.php?route=product/product&product_id=46621Author: Administrator
Last update: 2018-04-21 08:10
What happens if my GSM SIM900D shield is not Power ON?
Check the Fuse if its Good or busted by using Digital Multimeter Continuity. If there's no connection, bring your device (e-Gizmo GSM SIM900 Shield) in our store.
We have 3 months repair warranty. Free service fee. The replacement of the components is shoulder by the customer.Author: Administrator
Last update: 2018-04-21 08:33
e-Gizmo Kits & Modules » Input and Output Devices » RFID Card Reader 2
What is the Operating voltage of RFID Card Reader 2?
Its 7.5 ~ 9VDC, use external power supply (adaptor) connect it to DC jack or Arduino/gizDuino then in power source VIN.
You can input 5VDC power supply in (P2) from Arduino/gizDuino power source.Author: Administrator
Last update: 2018-04-21 08:43
What is the maximum detection range of RFID Reader 2?
It's 3 inches parallel to the coilAuthor: Administrator
Last update: 2018-04-21 08:46
What is the maximum cards that can be registered in RFID Reader 2?
Up to 100 users from internal memory alone (Stand alone).
If PC based, it's Unlimited using the RFID Reader 2 device as a Reader ONLY and create your own database(more details, Card info, name, address, IDs, etc) to your computer.Author: Administrator
Last update: 2018-04-21 08:51
My new RFID card (with 125Khz) is not detected in RFID Card reader 2? What happened?
Our RFID Card Reader 2 has a new version rev2 of firmware..
You have your (OLD) RFID Reader 2 with no label on the board #2 (revision 2), it needs to update the firmware to work on the new RFID Cards with 125KHz.
Kindly drop by in our store, we will update your device with no fee or extra charge.
http://www.e-gizmo.net
e-Gizmo Mechatronix Central Inc. ♦ 2/F VSC Building, 2313 Taft Ave, Malate, Manila ♦ Store Hours: 10:00AM to 7:00PM, Mon-Sat ♦ Tel: (02)290-1162Author: Administrator
Last update: 2018-04-21 09:10
Is there an Arduino Sketch for RFID Reader 2?
Yes and Here's the link:
http://e-gizmo.net/oc/kits%20documents/RFID%20Card%20Reader/New%20RFID%20Card%20Reader/RFIDsample.zipAuthor: Administrator
Last update: 2018-04-25 04:32
e-Gizmo Kits & Modules » Input and Output Devices » 4x4 Keypad Module
What arduino library should i use in 4x4 Keypad Module?
Keypad library: https://www.e-gizmo.net/oc/kits%20documents/4x4%20Keypad%20kit/Keypad.rarAuthor: Administrator
Last update: 2018-04-21 09:15
e-Gizmo Kits & Modules » Input and Output Devices » MFRC-522 RFID NFC Reader with card and tag
What is the Data Interface of MFRC-522 RFID NFC Reader?
It's SPI CommunicationAuthor: Administrator
Last update: 2018-04-21 09:20
What is the Operating Frequency and Operating voltage of MFRC-522 RFID NFC Reader?
The Operating frequency is 13.56 MHZ and it's 3.3V Input supply.Author: Administrator
Last update: 2018-04-21 09:22
Is that OK to rewrite the data on the NFC Card from MFRC-522 RFID NFC Reader ?
No. It's for ADVANCED user Only!
But if you trying to change the data on the tag/card (At your own risk). The data on the card if it is accidentally erased you cannot get back the default settings (Manufacture's setting).Author: Administrator
Last update: 2018-04-21 09:28
e-Gizmo Kits & Modules » Input and Output Devices » Serial Camera (CMOS Serial Port (UART) Camera Module)
Is this Serial Camera compatible in Arduino/gizDuino?
Yes of Course, and you need an SD/MMC Card shield and SD card to saved the image. The shot button is A5 (normally high), if pressed/ connect it to the Ground it will starts to capture image. Wait until the process is completed.
Here's the Sample sketch: https://www.e-gizmo.net/oc/kits%20documents/Serial%20Camera/e_gizmo_serial_camera_demo.zipAuthor: Administrator
Last update: 2018-04-21 09:39
Is that OK to use the Serial Camera in video captures?
No. It's only for Image/Photo Captures.Author: Administrator
Last update: 2018-04-21 09:41
e-Gizmo Kits & Modules » Input and Output Devices » XYL-890 USB Barcode Reader
Is this USB Barcode Reader compatible in USB Host shield?
Yes Of course.Author: Administrator
Last update: 2018-04-21 09:47
e-Gizmo Kits & Modules » Input and Output Devices » TF-MD-M1 Biometric Finger Print Scanner
Do you have Visual Basic sample application for TF-MD-M1 Biometric Fingerprint Scanner?
Yes we have, actually we create a source code working in VB6.0. Where you can enroll, identify and erased your fingerprint data manually. This module needs a USB to UART TTL Converter to communicate on your PC.
VB6.0 source code: https://www.e-gizmo.net/oc/kits%20documents/Fingerprint%20Scanner%20New/Visual%20Basic%206%20sample%20program.zip
USB to UART TTL converter: http://www.e-gizmo.net/oc/index.php?route=product/product&product_id=15
Wiring Diagram: http://e-gizmo.net/oc/kits%20documents/Fingerprint%20Scanner%20New/fingerprint.jpgAuthor: Administrator
Last update: 2018-04-21 09:58
Is there a VB dot net sample application for TF-MD-M1 Biometric Finger Print Scanner?
Yes Of course. Someone do the VB.net application. (Thanks to ucuceagit)
VB dot net: https://github.com/e-Gizmo/Fingerprint-dotNet
Demo Video link: https://youtu.be/VrDMpsCcdqsAuthor: Administrator
Last update: 2018-04-21 10:02
Do you have Arduino/gizDuino sketch for TF-MD-M1 Biometric Finger Print Scanner?
Yes Of course, another programmer created a program for Arduino sketch. (Thanks to ucuceagit)
FingerprintScanner: https://github.com/e-Gizmo/FingerprintScanner
FingerprintDemo2: https://github.com/e-Gizmo/FingerprintDemo2Author: Administrator
Last update: 2018-04-21 10:05
e-Gizmo Kits & Modules » Interface & Peripherals » Multi-voltage level converter
Where can i put a 5V and 3.3V output in Multi-voltage level converter?In Vref_A and Vref_B.
Vref_B = 5V (Reference B) is always greater than in Vref_A = 3.3V (Reference A).Author: Administrator
Last update: 2018-04-21 10:10
e-Gizmo Kits & Modules » Interface & Peripherals » USB to UART (Serial TTL) Converter
Where can i download the PL2303 driver Installer?
Visit at www.prolific.com
Download File: http://www.prolific.com.tw/UserFiles/files/PL2303_Prolific_DriverInstaller_v1190.zipAuthor: Administrator
Last update: 2018-04-21 10:53
e-Gizmo Kits & Modules » Interface & Peripherals » High Quality Passive Buzzer Module
What is the Operating voltage of High Quality Passive Buzzer Module?
It's 5V DC, you can use the power source from Arduino/gizDuino.Author: Administrator
Last update: 2018-04-21 11:05
e-Gizmo Kits & Modules » Interface & Peripherals » USB to TTL Serial CH340 Module
Where can i download the CH340 driver installer?
You can download it in our website.
Click here: http://e-gizmo.net/oc/kits%20documents/CH340%20USB-TTL/drivers.zipAuthor: Administrator
Last update: 2018-04-21 11:07