- What should i select on Arduino IDE board list (with gizDuino Patch), if i am using the gizDuino mini?
Select the Gizduino (mini) w/ ATmega328 or Gizduino (mini) w/ ATmega168. ...
- What is the input supply of gizDuino mini?
The input supply is 5VDC. ...
- What is Gizduino?
Gizduino is a microcontroller board based on the ATmega328 and ATmega168. It has 14 digital input/ouput pins, 6 analog inputs. With a 16 Mhz crystal ...
- Where do I go if I have questions/problem about gizDuino boards?
Visit the www.e-gizmo.net just contact our technical supports via chat online or through e-mail egizmo.technical@gmail.com! Your questions are welcome here so don’t be shy. ...
- What board (on Arduino IDE) should I select when working with gizDuino 5?
If you succesfully installed gizDuino patch file for the Arduino IDE, "gizDuino 328" should appear in the selection. Click to select. Otherwise, simply select the ...
- What is the maximum voltage for gizDuino?
The required voltage for gizDuino to external power supply is from 7 - 12VDC. ...
- Where can I download the PL2303 drivers for Gizduino version 4.0 to 5.0? Using Window XP/7/8/10?
Here's the Prolific website link: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
Direct download file: http://www.prolific.com.tw/UserFiles/files/PL2303_Prolific_DriverInstaller_v1190.zip
After you download the file, UNZIP and INSTALL it until you finished. Then restart your PC.
Troubleshoot:
If ...
- What is the Flash Memory of gizDuino V with ATmega168P/328P?
The Flash Memory is 16KB/32KBytes. ...
- What type of USB port can be use to upload a program in gizDuino X?
You can use the Printer Cable (Type B to Type A) for your gizDuino X board. ...
- What is the Flash Memory of gizDuino X with ATmega1281?
The Flash Memory is 128 KBytes. ...
- What is the Flash Memory of gizDuino PLUS with ATmega164P/324P/644P?
The Flash Memory is 16KB/32KB/64KBytes. ...
- What is IOT means?
Internet- Of-Things
~ the interconnection via the Internet of computing devices embedded in everyday objects, enabling them to send and receive data. ...
- What is the difference between SIM900 and SIM800/L?
The SIM900 and SIM800/L are the same GSM module where it can also be use to send/received SMS and Call. They are same ...
- What size of SIMCard will i use for SIM800L Shield?
In SIM800L Shield you need a MICROSIM card size. ...
- What happens if the replies of SIM800L shield is not exact characters? (ex. if i send "Hello", then i received like this "
Check your codes, if you are using SoftwareSerial Library and the assigned pins to RX (D2),TX (D3). On the SIM800L shield there's a slide ...
- What is the Name and Password of the Bluetooth Shield?
Name: HC-05 (Default)
Password: 1234 or 0000 (Default) ...
- What is the Flash Size in bytes and (bits) of esp-11 module?
The flash size of esp-11 module is 512KB (4MB)
Reference link table: https://www.esp8266.com/wiki/doku.php?id=esp8266-module-family ...
- What is the uploaded firmware in ESP-11 shield?
The "AT 9.2.2.bin" is the default firmware of ESP-11 shield.
On the sample application, it allows you to connect on the esp8266 module via WiFi ...
- Where can i download the ESP8266 Flasher? and How to use it?
You can download in our website the ESP8266 Flasher.
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/ESP%20flasher.zip
Instruction on how to use the flasher:
ESP-11 Shield Manual: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/esp%20wifi%20shield%20manual%201rev0.pdf
Download Firmwares: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/Firmwares/ ...
- Where can i download the NodeMCU Flasher? and How to use it?
You can download the NodeMCU Flasher in our website:
Here's the link: https://www.e-gizmo.net/oc/kits%20documents/ESP-11%20wifi%20shield/nodemcu-flasher-master.zip
Instructions on how to use the nodemcu Flasher:
LUA connect to wifi (as WEBSERVER).ppt ...
- What is the Input voltage of esp-07 module (esp8266) only?
Its 3.3VDC. ...
- What is the Flash size in bytes and bits in ESP-07?
It has 1MB (8MB) Flash size. ...
- What is the uploaded firmware (default) in ESP-12/E Shield?
Based on the sample application, its esp_iot_sdk_v1.5.0 firmware that contains: a) bin\at\noboot\"eagle.flash.bin" - 0x00000, b) bin\at\noboot\"eagle.irontext.bin" - 0x40000, c) bin\"blank.bin" - 0xfe000, d) bin\"blank.bin" - ...
- What is the operating voltage of 3-Channel line sensor?
Its 5VDC. You can use the power source from gizDuino/Arduino. ...
- What is the Power Input of 3-Axis Digital Accelerometer ADXL345?
Its 3.3VDC. You can use the power source from gizDuino / Arduino. ...
- What is the Operating voltage of 4 Direction/ Tilt Sensor?
The Power input is 3.3 to 5VDC. You can use the power source from gizDuino / Arduino. ...
- What is the Operating Voltage of 5Channel Line sensor?
Its 5VDC. You can use the power source from gizDuino/ Arduino. ...
- What is the Operational Voltage and Maximum Current load required of AC Power Analyzer II?
Electrical Operational voltage is 110V ~ 240V AC, 60Hz.
The Current Capacity is 8A continuous. ...
- What are the measures can AC power Analyzer II do?
• Real Power
• Apparent Power
• Reactive Power
• Fundamental & Harmonic Power
• Power Factor
• Volt rms
• Amp rms
• Watt-hr
• Plus a few more! ...
- What is the Power input of ACS current breakout board?
Its 5VDC, You can use the power source from gizDuino/Arduino. ...
- What are the other variants of ACS Current sensor breakout boards available?
•AC711T (12A) • ACS712T(5A)/(20A)/(30A) • AC713T(20A) • ACS714T(30A) ...
- What is the Operating voltage of Bio-Amp sensor?
Its 12VDC. You need an external power supply. ...
- Where can i download the Bluetooth Terminal/Graphics App?
In Google Play store.
On your smart phone (Android), Go to Playstore search for Bluetooth Terminal/Graphics and Install.
Here's the link: https://play.google.com/store/apps/details?id=com.emrctn.BluetoothGraphics&hl=en ...
- What is the Operating voltage of Compact Proximity?
Its 5VDC. You can use the power source from gizDuino/Arduino. ...
- What is the maximum distance range of Compact IR Proximity?
The maximum distance range of Compact IR Proximity is up to 2.8 inches. (72 mm Short range) ...
- What is the Output type?
The Output is Digital, 1 TTL active HIGH logic output. ...
- What is the Operating voltage of GAS sensor kit?
Its 7 ~ 9V DC. You can use an external power supply (adaptor) connected to DC jack of gizDuino/Arduino then in power source VIN. ...
- What are the sensitivity measures of MQ-2 module?
Sensitive for Methane, Butane, LPG, Smoke.
This sensor is sensitive for flammable and combustible gasses.
Datasheet: http://duckduckgo.com/?q=%22mq-2%22+gas+sensor+filetype%3Apdf ...
- What are the sensitivity measures of MQ-5 module?
Sensitive for Natural Gas, LPG, Alcohol.
Datasheet: http://duckduckgo.com/?q=%22mq-5%22+gas+sensor+filetype%3Apdf ...
- What are the sensitivity measures of MQ-7 module?
Sensitive for Carbon Monoxide
Datasheet: http://duckduckgo.com/?q=%22mq-7%22+gas+sensor+filetype%3Apdf ...
- What is the Operating Voltage of Heart Rate Monitor kit?
Its +5VDC, you can use the power source from gizDuino /Arduino. ...
- What is the Input Supply of Light and Dark sensor kit?
Its +5VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Operating voltage of Metal Detector kit?
Its 8 ~ 12VDC,
use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN. ...
- What is the maximum detecting range of Metal Detector kit?
It may be vary depending on the size of the materials/metal/aluminum. ...
- What is the Operating voltage of Sensor Amplifier kit?
Its 9~12VDC,use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN. ...
- What is the Operating voltage of Smoke sensor kit?
Its +9VDC, use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN. ...
- What is the Output type of Smoke sensor kit?
The Output is digital 0 (LOW) when smoke is detected. ...
- What is the Operating voltage of Soil Moisture sensor?
Its 5VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Output type of Soil Moisture sensor?
It has Analog and Digital Output.
The Analog voltage value for • Dry Soil less than 350 • Moist Soil 745 ~ 350 • ...
- What is the Operating voltage of Sound Activated Switch?
Its 5VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Operating voltage of Temperature Control Unit Display?
Its 7~ 9VDC, use external power supply (adaptor) connect it to DC jack of Arduino/gizDuino then in power source VIN. ...
- What type of Temperature sensor used in TDU?
Its LM34 Temperature sensor. ...
- What is TDU?
Temperature Display Unit (TDU) is made for easy and fast measurement circuit temperature sensor, whose output voltage is linearly proportional to the Fahrenheit on its ...
- What is the Operating voltage of Through Beam sensor?
Its 5VDC, you can use the power source from Arduino/gizDuino. ...
- What is the maximum distance range of Through Beam sensor?
The maximum distance range typically 1 meter. ...
- What is the Output type of Through Beam sensor?
The Ouput is Digital 1 (HIGH) when object is present. ...
- What is the Operating voltage of Water Level sensor kit?
Its 5VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Output type of Water level kit?
The Output is Digital. ...
- What is the Operating voltage of 3-Axis Gyroscope Break-out Board?
Its 3.3VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Data interface of 3-Axis Gyroscope Break-out Board?
Its Digital (I2C interface - 400KHz). ...
- What is the Operating voltage of 6 Degrees of Freedom?
Its 3.3VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Operating voltage of APDS-9930 Digital Proximity & Ambient Light Sensor?
Its 3.3VDC, you can use the power source from Arduino/gizDuino. ...
- What is the Output type of Coin Slot for ₱1, ₱5, ₱10?
The Output is PWM, means its by pulse, if you insert ₱1 equivalent to 1 pulse, ₱5 equivalent to 5 pulses, ₱10 equivalent to 10 ...
- What is the Operating voltage of Coinslot Single Coin?
Its +12VDC, use external power supply (adaptor) or connect it to DC jack of Arduino/gizDuino then in power source VIN. ...
- What board should i select in Arduino IDE using gizDuino PLUS ATmega644P Starter kit?
Select the Gizduino + w/ ATmega644P. [Make sure your Arduino IDE has gizDuino Patch] ...
- What is the Operating voltage of SIM800 Development Board?
It needs +5V 2Amp power supply to work.
Bandspeed Adaptor with 5V 2.6A:
http://www.e-gizmo.net/oc/index.php?route=product/product&product_id=46621 ...
- What size of SIMCard will i use for SIM800 Dev board?
In SIM800 Dev board kit you need a Standard SIM card size. ...
- What is the Operating voltage of SIM800L module?
The required power supply (modem) is 3.4 ~ 4.4V (4.0V Typical) to work. ...
- What size of SIMCard will i use for GSM Remote I/O Kit?
In GSM Remote I/O Kit you need a Standard SIM card size. ...
- What is the Operating voltage of GSM Remote I/O Kit?
It needs +5V 2Amp power supply to work.
Bandspeed Adaptor (5V 2.6A): http://www.e-gizmo.net/oc/index.php?route=product/product&product_id=46621 ...
- What should i send via SMS, is there an examples (List of complete Remote Commands)?
Here's the Complete list of Remote Commands:
Click here: https://www.e-gizmo.net/oc/kits%20documents/GSM%20REMOTE%20IO%20KIT/summary%20commands.png ...
- What happens if my GSM SIM900D shield is not Power ON?
Check the Fuse if its Good or busted by using Digital Multimeter Continuity. If there's no connection, bring your device (e-Gizmo GSM SIM900 Shield) in ...
- What is the Operating voltage of RFID Card Reader 2?
Its 7.5 ~ 9VDC, use external power supply (adaptor) connect it to DC jack or Arduino/gizDuino then in power source VIN.
You can input 5VDC power ...
- What is the maximum detection range of RFID Reader 2?
It's 3 inches parallel to the coil ...
- What is the maximum cards that can be registered in RFID Reader 2?
Up to 100 users from internal memory alone (Stand alone).
If PC based, it's Unlimited using the RFID Reader 2 device as a Reader ONLY and ...
- What arduino library should i use in 4x4 Keypad Module?
Keypad library: https://www.e-gizmo.net/oc/kits%20documents/4x4%20Keypad%20kit/Keypad.rar ...
- What is the Data Interface of MFRC-522 RFID NFC Reader?
It's SPI Communication ...
- What is the Operating Frequency and Operating voltage of MFRC-522 RFID NFC Reader?
The Operating frequency is 13.56 MHZ and it's 3.3V Input supply. ...
- Where can i put a 5V and 3.3V output in Multi-voltage level converter?In Vref_A and Vref_B.
Vref_B = 5V (Reference B) is always greater than in Vref_A = 3.3V (Reference A). ...
- Where can i download the PL2303 driver Installer?
Visit at www.prolific.com
Download File: http://www.prolific.com.tw/UserFiles/files/PL2303_Prolific_DriverInstaller_v1190.zip ...
- What is the Operating voltage of High Quality Passive Buzzer Module?
It's 5V DC, you can use the power source from Arduino/gizDuino. ...
- Where can i download the CH340 driver installer?
You can download it in our website.
Click here: http://e-gizmo.net/oc/kits%20documents/CH340%20USB-TTL/drivers.zip ...
