/**
 * \file
 *
 * \brief Atmel Common Sensor Service configuration parameters.
 *
 * This file defines tunable configuration constants for user selected API
 * features and functions.
 *
 * Copyright (c) 2011-2012 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#ifndef _CONF_SENSORS_H_
#define _CONF_SENSORS_H_

/* Sensor Platform Board Configuration
 *
 * The Sensor API hardware abstraction layer is conditionally compiled
 * for a particular platform and target MCU based upon application and
 * toolchain constants exposed through the common board.h file.
 */
#include    <board.h>

/* Atmel Software Framework (ASF) Interfaces */
#include    <sysclk.h>

#if UC3
#   include <cycle_counter.h>
#endif

/** \name Redirect C Standard I/O (USB or USART) */
/** @{ */
#if defined(CONF_STDIO_REDIRECT)
#if (UC3A || UC3B || UC3C || XMEGA_AU || XMEGA_B)
#   include <stdio/stdio_usb/stdio_usb.h>
#   define CONF_STDIO_USB           /* !< Configure C Standard I/O over USB/CDC */
#elif (UC3L || XMEGA_A1)
#   include <stdio/stdio_serial/stdio_serial.h>
#   define CONF_STDIO_SERIAL        /* !< Configure C Standard I/O over USART */
#endif
#endif
/** @} */

/** \name Xplained Platform USART Configuration */
/** @{ */
#if (BOARD == XMEGA_A1_XPLAINED)
#   define CONFIG_USART_IF          (USARTC0)
#elif (BOARD == XMEGA_B1_XPLAINED)
#   define CONFIG_USART_IF          (USARTE0)
#elif (BOARD == XMEGA_A3BU_XPLAINED)
#   define CONFIG_USART_IF          (USARTD0)
#elif (BOARD == UC3_L0_XPLAINED)
#   define CONFIG_USART_IF          (AVR32_USART2)
#elif (BOARD == UC3_A3_XPLAINED)
#   define CONFIG_USART_IF          (AVR32_USART2)
#else
#   define CONFIG_USART_IF          (NULL)
#endif

#if XMEGA
#   define CONFIG_USART_BAUDRATE    (115200)
#   define CONFIG_USART_CHAR_LENGTH (USART_CHSIZE_8BIT_gc)
#   define CONFIG_USART_PARITY      (USART_PMODE_DISABLED_gc)
#   define CONFIG_USART_STOP_BIT    (false)
#else
#   define CONFIG_USART_BAUDRATE    (115200)
#   define CONFIG_USART_CHAR_LENGTH (8)
#   define CONFIG_USART_PARITY      (USART_NO_PARITY)
#   define CONFIG_USART_STOP_BIT    (USART_1_STOPBIT)
#endif
/** @} */

/** \name Platform TWI and SPI Bus Configuration */
/** @{ */
#if (BOARD == XMEGA_A1_XPLAINED)
#   define CONFIG_TWI_MASTER_IF     (TWIF)
#   define CONFIG_SPI_MASTER_IF     (SPIF)
#elif (BOARD == XMEGA_B1_XPLAINED)
#   define CONFIG_TWI_MASTER_IF     (TWIC)
#   define CONFIG_SPI_MASTER_IF     (SPIC)
#elif (BOARD == XMEGA_A3BU_XPLAINED)
#   define CONFIG_TWI_MASTER_IF     (TWIC)
#   define CONFIG_SPI_MASTER_IF     (SPIC)
#elif (BOARD == UC3_L0_XPLAINED)
#   define CONFIG_TWI_MASTER_IF     (AVR32_TWIM0)
#   define CONFIG_SPI_MASTER_IF     (AVR32_SPI)
#elif (BOARD == UC3_A3_XPLAINED)
#   define CONFIG_TWI_MASTER_IF     (AVR32_TWIM0)
#   define CONFIG_SPI_MASTER_IF     (AVR32_SPI0)
#else
#   define CONFIG_TWI_MASTER_IF     (NULL)
#   define CONFIG_SPI_MASTER_IF     (NULL)
#endif

#define CONFIG_TWI_BAUDRATE         (400000)
#define CONFIG_TWI_OFFSET           (0)

#define CONFIG_SPI_BAUDRATE         (12000000)
#define CONFIG_SPI_OFFSET           (0)

#undef CONF_EVENT_COUNTERS          /**< Development and Debugging Facilities */
/** @} */

#endif