DC Power Supply kit		
	QTY	Descriptions   //Rerefence***
	2	100pF/50VDC ceramic cap //C7,C8
	4	10nF/50VDC ceramic cap //C1,C2,C3,C4,C11
	1	100nF/50V Polyester Film Cap //C6
	 1	47uF/25V Electrolytic Cap //C9
	1	100uF/25V Electrolytic Cap //C10
	1	1000uF/25V Electrolytic Cap //C12
	1	2200uF/50V Electrolytic Cap //C5
	1	3MM Green LED //D2
	1	3MM Red LED //D3
	1	W02 Rectifier //D1
	4	IN4002 Diodes //D4,D6,D7,D8
	1	RB411 Rectifiers //D5
	1	Transformer 06 //T1
	1	2-pins terminal block//P2
	1	TIP42 Transistor //Q1
	1	0R22 Resistor 2W //R9
	1	33R 1W Resistor //R3
	1	82R Resistor 1/4W //R4
	1	220R Resistor 1/4W //R8
	1	430R Resistor 1/4W //R10
	1	3K9 Resistor 1/4W //R11
	4	10k Resistor 1/4W //R1,R2,R5,R6
	1	270K Resistor 1/4W //R7
	1	5KB potentiometer //RV2
	1	50KB Potentiometer //RV1
	1	NJM2904 IC //U2
	1	LM317LU1 IC TO92
	1	PCB Board
	1	TO-220 Silicone Insulator //Q1
	1	3x10mm Machine Screw
	1	4.7uF/50v ceramic //C13
	1	EHS-22 Heat Sink
	1	Transformer, 220VAC Pri, 18V@1A
		sec1,3.5VAC @0.5A sec2

**Important note: " for jumpers***"
Please read the "PSkit Manual" Page 4 for the connections of 2 jumpers. Thank you.
For more questions/suggestions: please contact our tech supports: www.e-Gizmo.com.